Adaptec 5325301728 User Guide - Page 38

Installing the Server into a Rack Snap Server 4200/4500 Series Attaching the Front Brackets to the Chassis 1 Position one of the front brackets at the front of the chassis side panel. Note The brackets are oriented so one goes on the left side, and the other goes on the right side. 2 Insert 2 small screws to attach each bracket to the chassis, and tighten them firmly. Attaching the Inner Sliders to the Chassis 1 Position an inner slider behind an ear bracket at the front of the chassis side panel. Be sure to position the inner slider with the release button toward the front of the chassis. Inner slider release button 2 Align the screw holes in the inner slider with corresponding holes in the chassis side panel. 10 Field Service Documentation Copyright © 2007, Adaptec, Inc. All rights reserved. Information in this document is subject to change without notice and does not represent a commitment on the part of Adaptec or any of its subsidiaries.