Adaptec 5325301728 User Guide - Page 8
Replacing the Fan 3 Assembly, Replacing the Top Cover, Restoring Power to the Server
UPC - 753253017287
View all Adaptec 5325301728 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 8 highlights
Replacing a Fan Assembly Snap Server 4200/4500 Series Replacing the Fan 3 Assembly 1 Remove the old Fan 3 assembly. Grasp the old fan assembly and lift it straight up. Notice the three locating pins on the floor of the server chassis. connector 2 Lower the new fan assembly into place, being careful to align it with the connector. 3 Press down on the fan assembly to ensure that it is seated securely. Replacing the Top Cover Be sure to replace the top cover. 1 Lower the top cover onto the server. 2 From the rear of the server, push the cover forward until it is firmly seated. 3 To secure the cover, tighten the screw at the rear of the server. Restoring Power to the Server 1 If you removed the server from the rack, replace it now with the help of an assistant. 2 Reattach all cables to the rear of the server. 3 Press the power button on the front of the server. 4 Field Service Documentation Copyright © 2007, Adaptec, Inc. All rights reserved. Information in this document is subject to change without notice and does not represent a commitment on the part of Adaptec or any of its subsidiaries.