Adaptec 5325301728 User Guide - Page 6

Replacing a Fan Assembly Snap Server 4200/4500 Series 3 The cover is seated tightly on the chassis. Standing in front of the server, press down firmly on the cover with both hands, and push the cover loose with a short, forceful thrust. 4 Slide the cover off the rear of the server and set it aside. Replacing the Fan 1 Assembly 1 Remove the old Fan 1 assembly. Grasp the old fan assembly and lift it straight up. Notice the locating pin on the floor of the server chassis. 2 Lower the new fan assembly into place, being careful to align it with the locating pin. Press down on the fan assembly to ensure that it is seated securely. 2 Field Service Documentation Copyright © 2007, Adaptec, Inc. All rights reserved. Information in this document is subject to change without notice and does not represent a commitment on the part of Adaptec or any of its subsidiaries.