Adaptec 5325301728 User Guide - Page 26

Replacing DIMMs Snap Server 4200/4500 Series 2 After the power LED is off, disconnect the AC power cord and all other cables from the back of the server. 3 The server is heavy. With the help of an assistant, remove the server from the rack to a clean surface with ample room to the front and rear. Removing the Top Cover 1 Position the server with ample room to the front and rear of the server. 2 To release the cover, turn the screw at the rear of the server counterclockwise. 3 The cover is seated tightly on the chassis. Standing in front of the server, press down firmly on the cover with both hands, and push the cover loose with a short, forceful thrust. 4 Slide the cover off the rear of the server and set it aside. 2 Field Service Documentation Copyright © 2007, Adaptec, Inc. All rights reserved. Information in this document is subject to change without notice and does not represent a commitment on the part of Adaptec or any of its subsidiaries.