Archos 500973 User Manual - Page 51
Protected Networks WEP, WPA or WPA2 KEY
UPC - 690590509733
View all Archos 500973 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 51 highlights
TV+ MANUAL V1.0 * Most networks support DHCP. main settings > P. 51 • If the network needs to be configured manually, use the left/right arrows to select the "Manual" setting on the "Configuration" parameter. • Other parameters will appear: the required information can be obtained from the person who manages the network. When you have finished entering all the information, select the "Connect" button, and your ARCHOS will connect to this network, provided the signal is strong enough. Protected Networks (WEP, WPA or WPA2 KEY) • Protected networks require an encryption key to connect. • The type of key (WEP, WPA or WPA2) will be detected automatically by your device. • The rest of the required information can be obtained from the person who manages the network. You will have to specify the following settings: "Key length" (for WEP networks only) - the authentication key can be 10 characters long (64bit) or 26 characters long (128bit). "Key format" (for WEP networks only) - in some cases you may need to change the key format in order to enter a passphrase/password. See the documentation that came with your WiFi router or modem. "Key" (WEP or WPA) - press OK, enter the encryption key using the remote control's keyboard and press OK again to validate. "Authentication" (for WEP networks only) - the network's authentication method can be based on an "Open System (default)" or a "Shared Key".