Brother International BAS-311E Network Users Manual - English - Page 109
Problem solution and measures, Precautions, Before adjustment
View all Brother International BAS-311E manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 109 highlights
Chapter 7 s Problem solution and measures Precautions ¡ Pay attention to the following when opening the control box for maintenance. ™ Electrical shock Some large capacitors may have a high voltage remaining in them for up to 5 minutes after the power is turned off. To prevent electrical shock, wait at least 5 minutes after the power is turned off before doing the following: * Opening and closing the control box * Replacing fuses * Separating and rejoining connectors * Measuring resistance * Doing anything with a possibility of touching something inside the control box Some adjustments require measuring the voltage while the power is turned on with the control box kept open. In such a case, be careful not to touch any place other than that for the measurement. In addition, always keep in mind that a high voltage remains for 5 minutes after the power is turned off. ™ Injury While the power is turned on, the cooling fan of the control box operates; be careful not to get caught in it. When separating or rejoining connectors, and measuring something, be careful not to cut your fingers on metal parts such as the heatsinks and overs. ¡ When replacing a fuse, be sure to use a new one of the same quality and capacity as the old one. ¡ Refer to the circuit block diagram at the end of this manual regarding the connector numbers and their matches. Before adjustment ¡ While the power is turned off, check each connector is securely plugged in by referring to page 73 "List of connector numbers and matches." ¡ Find the error status number in the troubleshooting flowchart. ¡ From the applicable part of the flowchart, take the reference number to find the correspondingly numbered details of the problem in the following table. BAS-311E.311EL.326E.326EL 101