Brother International BAS-311E Network Users Manual - English - Page 36
remove the slack from the, work clamp lifter wire
View all Brother International BAS-311E manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 36 highlights
Chapter 3. Assembly !2 9. Attach the tension release assembly q to the machine body with the screw !2. 10.Attach the cord holder !3 to the machine body. q 11.Attach the tension release bar !4, the pin !5 and the thread tension assembly !6 to the machine. Fit the set screw !7 in the groove of the thread tension assembly !,6 then tighten it. !7 !4 !5 !6 @1 !8 @0 !9 @2 t @0 !9 12.Turn the stepping solenoid !8 fully in the direction of the arrow. Move the lifter lever t so that there is no clearance (0 mm) between work clamp lifter lever !9 and the presser bar clamp @,0 remove the slack from the work clamp lifter wire @1, and tighten the bolt @2. 28 BAS-311E.311EL.326E.326EL
28
BAS-311E.311EL.326E.326EL
Chapter 3. Assembly
11.Attach the tension release bar
!4
, the pin
!5
and the
thread tension assembly
!6
to the machine. Fit the set
screw
!7
in the groove of the thread tension assembly
!6
, then tighten it.
12.Turn the stepping solenoid
!8
fully in the direction of
the arrow.
Move the lifter lever
t
so that there is no
clearance (0 mm) between work clamp lifter lever
!9
and the presser bar clamp
@
0
, remove the slack from the
work clamp lifter wire
@
1
, and tighten the bolt
@
2
.
9.
Attach the tension release assembly
q
to the machine
body with the screw
!
2
.
10.Attach the cord holder
!
3
to the machine body.
!
2
q
!
6
!
4
!
5
!
7
@
0
!
9
@
1
@
2
!
8
@
0
!
9
t