Brother International BAS-311E Network Users Manual - English - Page 44
through the X-feed shaft sup, Pass the X-feed shaft
View all Brother International BAS-311E manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 44 highlights
Chapter 3. Assembly @3 @9 #2 @8 #0 9. Attach the Y-axis feed guide @0 to the left of the X-feed bracket @1, pressing the former against the latter. 10.Attach the Y-axis feed bracket @,2 the cross roller @3, and the right of the Y-axis feed guide @4 right of the to the Xfeed bracket @1. Note: When attaching the Y-axis feed guide @4 to the right of the X-feed bracket @,1 lightly push it to the left so that there is no looseness in the Y-axis feed guide @2, and tighten the set screw @5. @0 @2 @1 Parallel @6 @8 w #3 !5 #1 @4 @5 11.Tilt the machine head until it stops. 12.Pass the Y-driving shaft @6 through the Y-driving shaft holder !6. Align the reference line on the Y-driving shaft @6 with the end of the Y-driving shaft holder !6. @6 !6 Then, tighten the bolt @7. Note: Be sure to make the X-feed shaft support @8 paral- lel to the top of the bed to prevent timing belt (Y) q from being damaged or cut. 13.Raise the machine head. @7 Line !6 14.Temporarily attach the presser arm @9 to the Y-feed bracket @2 with the screw #0. 15.Pass the X-feed shaft #1 through the X-feed shaft sup- port @8 and the presser arm @,9 then secure it with the set screw #2. 16.Loosen the bolt !5 of the driving P motor bracket w. When the power is turned off, adjust the driving P motor q bracket w with the adjust bolt !5 so that timing belt (Y) q is not slack and the presser arm @9 moves smoothly forwards and backwards. Then power on the machine and adjust the tension of timing belt (Y) q with the ad- @9 just bolt #3 so that there is no looseness of the presser arm @9. 17.After adjustment, tighten the bolt !5 of the driving P mo- tor bracket w. 36 BAS-311E.311EL.326E.326EL