Brother International BAS-311E Network Users Manual - English - Page 40
Adjustment procedure, Place X-timing belt B
View all Brother International BAS-311E manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 40 highlights
Chapter 3. Assembly !7 i !9 !8 i 9.8N (1kgf) 3mm 5. Attach the linear guide !,5 the X-feed bracket !6, and the X-feed guide !7 to the bed using the three bolts !8. !6 Note: Adjust the X-feed guide !7 so that the X-feed bracket !6 can easily move left or right. !7 !5 Reference area !6 Adjustment procedure 1. Position the front linear guide !9 in the reference area for installation on the front of the bed, and secure it using the six bolts @0 and six washers. 2. Attach the rear linear guide @1 to the rear of the bed using the five bolts @2 and five washers. Keep in mind that the linear guide can move easily. 3. Attach the X-feed bracket !6 to the linear guide !5 using the eight screws. 4. Adjust the rear linear guide @1 so that the X-feed bracket !6 can easily move left and right, and tighten the five bolts @2 on the rear linear guide. 5. Place X-timing belt B i between the two timing belt spacers !9 on the back of the X-feed bracket !6. Align a rectangular slot of the belt holder !8 with a tooth of X-timing belt B i. and secure them using the belt @0. @0 6. Move the X-feed bracket !6 to the left end and apply a load of 9.8N (1 kgf) to the center of the X-timing belt B i. Then adjust the X-timing belt B i with the adjust screw @1 to produce a deflection of 3 mm. !6 @1 80mm 32 BAS-311E.311EL.326E.326EL