Brother International BAS-311E Network Users Manual - English - Page 45
Feed mechanism Y axis 326E
View all Brother International BAS-311E manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 45 highlights
Feed mechanism (Y axis) 326E q Chapter 3. Assembly r w e 25 - 44N (2.5 - 4.5kgf) Rack 1. Engage the driving gear w embedded in the Y-feed pulse motor bracket q with the rack of the Y-driving shaft e. 2. The engagement load between the driving gear w embedded in the Y-feed pulse motor bracket q with the rack of the Y-driving shaft e should be 25 - 44 N ( 2.5 - 4.5 kgf) or less (so that the load will not fluctuate sharply). Move the Y-feed pulse motor bracket q vertically to adjust the load, and secure it using the bolts r. t i o o u !0 y !1 3. Attach the Y-axis feed guide t to the left of the X-feed bracket y, pressing the former against u the latter. 4. Attach the Y-feed bracket i, the cross roller o, and the right Y-feed guide !0. When attaching the right Y-feed guide !0 to the right of the X-feed bracket y, lightly pushing it to the left so that there is no looseness in the Y-feed bracket i, and tighten the bolt and set screw !1. BAS-311E.311EL.326E.326EL 37