Brother International BAS-311E Network Users Manual - English - Page 49
Presser foot mechanism, using the presser adjusting nut
View all Brother International BAS-311E manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 49 highlights
8. Presser foot mechanism o !0 !4 !3 !2 u !1 !5 !6 !7 y i t r e q w 32mm Chapter 3. Assembly 1. Insert the presser bar w into the presser bar bush q. Pass the presser bar lifter e, the cushion r, and the needle bar clamp t through the presser bar w in that order. 2. Secure the needle bar clamp t with the screw. 3. Insert the spring y and the spring guide u from the top of the arm, pass the spring guide u through the washer i and the presser bar w, and attach the presser adjusting screw o. Note: Position the presser adjusting screw o using the presser adjusting nut !0 so that there is approx. 32 mm from the top of the presser adjusting screw o to the top of the machine. 4. Pass stepping work clamp arm F !1 through spreader shaft bushes (L) and (R) !,2 then insert it into stepping work clamp arm R !3. 5. Attach the stepping link assy !6 to the arm using the shoulder screw !5, and to the presser bar lifter e using the retaining ring !7. BAS-311E.311EL.326E.326EL 41