Brother International BAS-311E Network Users Manual - English - Page 75

Adjusting the driving lever stopper position, 15. Adjusting the thread trimmer driving lever

Get Brother International BAS-311E PDF manuals and user guides View all Brother International BAS-311E manuals
Add to My Manuals
Save this manual to your list of manuals

Page 75 highlights

Chapter 4. Adjustments 14. Adjusting the driving lever stopper position q w 6mm 6mm t e e Most 0.15 mm r r 1. Remove the screws q and the top cover w. 2. If thread trimming is not performed, loosen the bolts t so that the difference between the thread trimmer driving lever e and the driving lever stopper r is 6 mm. * Make sure that the clearance between the thread trimmer driving lever e and the driving lever stopper r is at the most 0.15 mm. The driving lever stopper r has an imprinted number mark: 2, 3, or 4. If the clearance is larger than 0.15 mm, replace the driving lever stopper 4 with that with a different number. For example, when the number 3 stopper is used, replace it with number 4 stopper. When the number 4 stopper is used, replace it with number 2 stopper. 15. Adjusting the thread trimmer driving lever position q y w t r e 1. Remove the screws q and the top cover w. 2. Turn the pulley to place the thread trimmer cam e with its non-operating portion facing upward. 3. Loosen the nut t. Move the screw y so that the roller r of the thread trimmer driving lever will return smoothly when it is put into the groove of the thread trimmer cam e. BAS-311E.311EL.326E.326EL 67

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
  • 122
  • 123
  • 124
  • 125
  • 126
  • 127
  • 128
  • 129
  • 130
  • 131
  • 132
  • 133
  • 134
  • 135
  • 136
  • 137
  • 138
  • 139
  • 140
  • 141
  • 142
  • 143
  • 144
  • 145
  • 146
  • 147
  • 148
  • 149
  • 150
67
BAS-311E.311EL.326E.326EL
Chapter 4. Adjustments
14. Adjusting the driving lever stopper position
1.
Remove the screws
q
and the top cover
w
.
2.
If thread trimming is not performed, loosen the bolts
t
so that the difference between the thread trimmer driving lever
e
and the driving lever stopper
r
is 6 mm.
*
Make sure that the clearance between the thread trimmer driving lever
e
and the driving lever stopper
r
is at the
most 0.15 mm.
The driving lever stopper
r
has an imprinted number mark: 2, 3, or 4. If the clearance is larger than 0.15 mm, replace
the driving lever stopper 4 with that with a different number. For example, when the number 3 stopper is used,
replace it with number 4 stopper. When the number 4 stopper is used, replace it with number 2 stopper.
15. Adjusting the thread trimmer driving lever position
1.
Remove the screws
q
and the top cover
w
.
2.
Turn the pulley to place the thread trimmer cam
e
with its non-operating portion facing upward.
3.
Loosen the nut
t
. Move the screw
y
so that the roller
r
of the thread trimmer driving lever will return smoothly when
it is put into the groove of the thread trimmer cam
e
.
q
w
t
e
r
e
r
6mm
6mm
q
w
y
t
r
e
Most 0.15 mm