Brother International BAS-311E Network Users Manual - English - Page 64
necting rod, is pulled by the con
View all Brother International BAS-311E manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 64 highlights
Chapter 4. Adjustments NOTE: A. After the movable knife and fixed knife are properly engaged, tighten shoulder screw. B. Turn the movable knife (in the direction of the arrow) while the shoulder screw is still tightened. C. Loosen the shoulder screw. D. Turn the movable knife (in the direction of the arrow) while the shoulder screw is still loosened. Repeat above steps (A, B, C and D) four of five times to maintain the cutting performance of the knife. Movable knife Knives Knives Fixed knife Knives w q u i !0 o Knives 4. Fit the thread cutter connecting rod o on connecting lever pin !0, and install the needle plate w. * When fitting the connecting rod o on the connecting lever pin !0 and before tightening the screws u and i, move the needle plate w back and forth slightly to confirm that the movable knife q is pulled by the connecting rod o. 56 BAS-311E.311EL.326E.326EL