Brother International BAS-311E Network Users Manual - English - Page 63
Adjusting the movable knife, 1. Replacing the movable and fixed knives
View all Brother International BAS-311E manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 63 highlights
7. Adjusting the movable knife w q Index mark A Chapter 4. Adjustments e r Loosen the nut e and move connecting rod lever r to the left or right to adjust so that the V section A of the movable knife q is aligned with the index mark B on the needle plate w when the machine is at the stop position. 7-1. Replacing the movable and fixed knives u i w t y !0 o 1. Remove the bolt t, and the feed plate y, the screws u and i, and the needle plate w. Disconnect the thread cutter connecting rod o from the connecting lever pin !0. q Spacer !2 !1 0.5mm !1 2. Remove the movable knife, and replace it with a new one. Check the cutting edge of the movable knife q and the fixed knife !1. If necessary, use the provided movable knife spacer (t=0.4,t=0.5,t=0.6) to adjust the knives so that they cut properly. 3. Install the fixed knife !1 0.5 mm away from the needle hole plate !2. BAS-311E.311EL.326E.326EL 55