Brother International IntelliFax-1920CN Users Manual - English - Page 120
Remote commands
View all Brother International IntelliFax-1920CN manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 120 highlights
Remote commands Follow the commands below to access features when you are away from the machine. When you call the machine and enter your Remote Access Code (3 digits followed by ), the system will give two short beeps and you must enter a remote command. Remote commands 90 Exit 91 Playing Voice Messages (FAX-1920CN only) 1 Skip to back or Repeat 2 Skip next 9 STOP Playing 93 Erase all ICM (FAX-1920CN Only) 94 Play and Record OGM in Memory (FAX-1920CN only) 1 Play 1 Msg Ctr OGM 2 F/T OGM 2 Record 1 Msg Ctr OGM 2 F/T OGM Operation details After a long beep, you can exit Remote Retrieval. After one long beep, the machine plays the ICM. Press 1 while listening to an ICM to repeat it. If you press 1 before a message, you will hear the previous message. While playing the ICM, you can skip to the next message. Stop playing the ICM. If you hear one long beep, the erase is accepted. If you hear three short beeps, you cannot erase because all voice messages have not been played, or there are no voice message to erase. *This code erases all recorded messages, not one at a time. The machine plays the selected OGM. You can stop playing OGMs by pressing 9. After one long beep, you can record the selected OGM. You will hear the message played once. You can stop recording the message by pressing 9. REMOTE FAX OPTIONS 8 - 6