Brother International IntelliFax-1920CN Users Manual - English - Page 76
Setting Toll Saver FAX-1920CN Only
View all Brother International IntelliFax-1920CN manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 76 highlights
Setting Toll Saver (FAX-1920CN Only) When you set the toll saver feature, the machine answers after four rings if you don't have voice or fax messages and after two rings if you do have voice or fax messages. This way, when you call the machine for remote retrieval and let it ring three times, you know you have no messages and can hang up to avoid a toll charge. When Toll Saver is On, it overrides your Ring Delay setting. Toll Saver must be off for the machine to operate using your Ring Delay setting. (See Setting the Ring Delay on page 5-5.) The Toll Saver feature is available only when the Message Center is set to On. If you are using Distinctive Ring, do NOT use the Toll Saver feature. 1 If it is not illuminated in green, press 2 Press Menu/Set, 2, 1, 1. 3 Press or to select Toll Saver. Press Menu/Set. 4 Press or to select On. Press Menu/Set. 5 Press Stop/Exit. (Fax). 1.Ring Delay SETUP RECEIVE 5 - 6