Brother International IntelliFax-1920CN Users Manual - English - Page 121

Remote commands Operation details 95 Change the Fax Forwarding or Paging settings 1 OFF 2 Fax Forwarding 3 Paging 4 Fax Forwarding number If you hear one long beep, the change has been accepted. If you hear three short beeps, you cannot change it because the conditions have not been met (for example, registering a fax forwarding or paging number). You can register your Fax Forwarding number by entering 4. (See Changing your Fax Forwarding number on page 8-9.) Once you have registered the number, Fax Forwarding will be set to On. 6 Fax Storage ON 7 Fax Storage OFF You can turn Fax Storage to On (or Off after you have retrieved or erased all your messages). 96 Retrieve a fax 2 Retrieve all faxes Enter the number of a remote fax machine to receive stored fax message(s). (See page 8-9.) 3 Erase faxes from the memory If you hear one long beep, you can erase fax messages from the memory. 97 Check the receiving status (MFC-3320CN only) 1 Fax You can check whether your machine has received any faxes. If yes, you will hear one long beep. If no, you will hear three short beeps. 97 Check the receiving status You can check whether your machine has (FAX-1920CN only) received any FAX or VOICE messages. If 1 Fax 2 Voice yes, you will hear one long beep. If no, you will hear three short beeps. 98 Change the Receive Mode (MFC-3320CN only) 1 External TAD 2 Fax/Tel If you hear one long beep, you can change the Receive Mode. 3 Fax Only 8 - 7 REMOTE FAX OPTIONS