Brother International IntelliFax-1920CN Users Manual - English - Page 97

Fax Resolution You can use the Fax Resolution key to change the setting temporarily (for this fax only). Press Fax Resolution and or to select the setting you want, and then press Menu/Set. -OR- You can change the default setting. 1 If it is not illuminated in green, press (Fax). 2 Load your original. (See Load originals on page 2-1.) 3 Press Menu/Set, 2, 2, 2. 4 Press or to select the 2.Fax Resolution resolution you want. Press Menu/Set. 5 Press Stop/Exit. Standard Fine S. Fine Photo Suitable for most typed originals. Good for small print and transmits a little slower than Standard resolution. Good for small print or artwork and transmits slower than Fine resolution. Use when the original has varying shades of gray. This has the slowest transmission time. Manual and automatic fax Redial If you are sending a fax manually and the line is busy, press Redial/Pause, and then press Black Start or Color Start to try again. If you want to make a second call to the last number dialed, you can save time by pressing Redial/Pause and Black Start or Color Start. Redial/Pause only works if you dialed from the control panel. If you are sending a fax automatically and the line is busy, the machine will automatically redial one time after five minutes. 6 - 8 SETUP SEND