Brother International PT-580C Users Manual - English and Spanish - Page 15
COMPUTER CONNECTION, Insert the large plug into the COM port of your IBM computer. - software
View all Brother International PT-580C manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 15 highlights
This machine is equipped with a jack which allows you to print stamp and labels that you create with the P-touch EDITOR software installed on your IBM or compatible PC. TO CONNECT THE COMPUTER: (1) Be sure both the P-Touch 580C and the computer are turned off. (2) Insert the small plug on the connection cable into the jack marked INTERFACE on the right of the P-Touch 580C. (3) Insert the large plug into the COM port of your IBM computer. + Use the plug that is compatible with the COM port on your computer and leave the other plug unconnected. (4) Turn on the P-Touch 580C, then start up the computer. + Hold down the CODE key and press the INTERFACE key on the P-Touch 580C to enter Interface mode. Only use the connection cable designed exclusively for this machine. 11