Brother International PT-P900W Users Guide - Page 172
Network Setup Problems, Wi-Fi indicator on the P-touch Label Printer.
View all Brother International PT-P900W manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 172 highlights
Troubleshooting Network Setup Problems 18 Problem Solution You are using security software Confirm your settings in the installation dialog box. Your security settings (SSID/Network Key) are incorrect Allow access when the security software alert message appears during the printer installation. 18 Recheck and select the correct security settings. The manufacturer's name or model number of the wireless access point/router may be used as the default security settings. See the instructions supplied with your wireless access point/router for information on how to find the security settings. Ask the manufacturer of your wireless access point/router or ask your Internet provider or network administrator. Your P-touch Label Printer is placed Move your P-touch Label Printer within about 3.3 ft (1 m) of the mobile device too far from your mobile device when you configure the Wi-Fi network settings. There are obstructions (walls or furniture, for example) between your P-touch Label Printer and the mobile device Move your P-touch Label Printer to an obstruction-free area. A wireless computer, Bluetooth supported device, microwave oven or digital cordless phone is near the P-touch Label Printer or the wireless access point/router Move other devices away from the P-touch Label Printer. You are using MAC Address filtering You can confirm the MAC address by printing the printer settings report. See Confirming the P-touch Label Printer Settings on page 82 for more information. Your wireless access point/router is in stealth mode (not broadcasting the SSID) You must type the correct SSID name during the installation or when using the Printer Setting Tool. Check the SSID name in the instructions supplied with your wireless access point/router and reconfigure the Wi-Fi settings. Your P-touch Label Printer is not connected correctly to the network Check the (Wi-Fi) indicator on the P-touch Label Printer. : The network is correctly connected. I have checked and tried all of the above, but still cannot complete the Wi-Fi settings (flashes once every three seconds): The network is connected incorrectly, and the Wi-Fi settings must be reconfigured. Turn off the P-touch Label Printer, and then turn it on again. Then try and configure the Wi-Fi settings again. 162