Brother International PT-P900W Users Guide - Page 233
Replacing the Time/Date Battery
View all Brother International PT-P900W manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 233 highlights
Using the Touch Panel Display (Optional:PA-TDU-003) (PT-P950NW Only) Replacing the Time/Date Battery 24 A time/date battery is provided to maintain the settings for the internal clock. The battery will be consumed even if the P-touch Label Printer is not used for a long period of time. Important • Use only recommended batteries in the P-touch Label Printer. Other batteries may cause damage to the P-touch Label Printer. • When storing or discarding the battery, wrap it (for example with cellophane tape) to prevent it from short-circuiting. (Battery insulation example) 1 2 1 Cellophane tape 2 Time/date battery 24 • We recommend replacing the battery every two years. • If the clock is reset while power is supplied to the P-touch Label Printer, replace this battery. When replacing the battery, buy a CR2032 battery (recommended manufacturers: Hitachi Maxell, Ltd., FDK Corporation). • Dispose of the battery at an appropriate collection point, not in the general waste stream. In addition, be sure to observe all applicable federal, state, and local regulations. a Press and hold the (Power) button to turn off the P-touch Label Printer, and then disconnect the P-touch Label Printer from the AC power outlet. If the rechargeable Li-ion battery (optional) is installed, remove the rechargeable battery. b Using a coin or similar object, slowly turn the time/date battery cover in the direction of the arrow on the battery cover until it stops, and then remove the time/date battery cover. 223