Brother International PT-P900W Users Guide - Page 33
Connecting Using the Serial Adapter (Optional:PA-SCA-001 - manual
View all Brother International PT-P900W manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 33 highlights
Using the Other Interfaces (Serial Interface/Bluetooth Interface) Connecting Using the Serial Adapter (Optional:PA-SCA-001) 4 You can connect the P-touch Label Printer to a barcode scanner or scale using a serial interface. a Before connecting the serial cable, make sure the P-touch Label Printer and the barcode scanner or scale are turned off. b Connect the RJ25 end of the adapter to the P-touch Label Printer. c Connect the P-touch Label Printer end of the serial cable to the DB9M side of this adapter. 4 d Connect the other end of the serial cable to the serial port on your barcode scanner or scale. Note • The serial interface is not compatible with the Windows® or Mac printer drivers and is only used for template mode. • The default communication settings are as follows: Baud rate: 9600 bps Parity: None Bit length: 8 bits Busy Control: DTR • To change the communication settings, use [P-touch Template Settings] in the Printer Setting Tool. For more information on setting the P-touch Label Printer baud rate, download P-touch Template Manual/Command Reference (English only) from the Brother Solutions Center at support.brother.com To download the latest version, from the Brother Solutions Center website: 1 Visit support.brother.com 2 Select the product, and then select [Manuals]. Serial adapter converts RJ25 to a D-sub 9-pin male connector. 1 1 RJ25 to DB9M serial adapter 23