Brother International PT-P900W Users Guide - Page 214
Setting the Time and Date, Device settings
View all Brother International PT-P900W manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 214 highlights
Using the Touch Panel Display (Optional:PA-TDU-003) (PT-P950NW Only) Key (admin key) 1 (Continue d) Parameter Network LAN WLAN Wdirect Settings Description IP Address/Subnet Mask/Gateway Displays the network settings. IP Address/Subnet Mask/Gateway/ Status/Signal/Channel/ SSID/Comm. Mode/Infrastructure Mode Device Name/SSID/IP Address/Password/Stat us/Signal/Channel/Wire lessDirect Mode 1 [ ] (admin key) can be accessed only when touch panel A (basic control panel) is set. Note • Some settings may differ depending on the firmware (printer software). • To reset the settings, use [Device settings] in the Printer Setting Tool to return all settings to factory settings. For more information, see Device Settings for Windows® on page 44. Setting the Time and Date Adjust the clock to the current time and date displayed on the main screen. 24 24 a Press [ ] (admin key). b Press [b], select [Setup], and then press [OK]. c Press [b], select [Set Clock], and then press [OK]. The clock setting screen appears. d Press the number keys to specify the last two digits of the year, two digits for the month and two digits for the day. For December 1, 2016, press [1] [6] [1] [2] [0] [1]. e Press [a] or [b] to select AM, PM or 24, and then press the number keys to specify two digits each for the hour and minutes. To enter 2:45 in the AM/PM format, press [b] to select [PM], and then press [c], then [0] [2] [4] [5]. f Press [OK]. The main screen appears, and the specified time and date are displayed. Note The format for the time and date can be changed: Press [ ] (admin key), select [Setup], then [Time&Date Form] from the parameters, and then specify settings for [Date Format] and [Time Format]. 204