Brother International PT-P900W Users Guide - Page 41

Changing the P-touch Label Printer Settings Menu Bar 5 1 2 3 4 5 5 7 6 8 9 10 1 Apply Settings to the Printer Applies the settings to the printer. 2 Save Settings in Command File Saves the specified settings in a command file. The file extension is .bin. The saved command file can be used with the mass storage mode to apply the settings to a printer. (See Mass Storage Mode on page 82.) Note If the [Disable these settings] check box is selected, the settings in that tab are not saved. Important • The following information is not saved with the command file: • Node name • IP address, subnet mask and default gateway (when the IP address is set to [STATIC]) • The saved communication settings commands are intended to be used only for applying settings to a printer. To apply the settings to the printer using this command file, use the mass storage mode. • Saved command files contain authentication keys and passwords. Take necessary measures to protect saved command files, such as saving them in a location that cannot be accessed by other users. • Do not send the command file to a different printer model. 3 Import  Import from the current computer wireless settings Imports the settings from the computer. 31