Canon BJC 3000 User Manual - Page 359

Paper Jams or Does Not Feed I Paper does not feed from auto sheet feeder After the print job is started, the paper loaded in the auto sheet feeder does not feed. CHECK 1 IS THE PAPER TOO THICK? Thick paper does not feed from the auto sheet feeder. You cannot attempt to print on paper or other media thicker than .024" or 28 lb (0.6 mm or 105 g/m2). CHECK 2 IS THE SHEET FEEDER OVERLOADED? The number of sheets you can load in the auto sheet feeder depends on the media you are using. The media does not feed correctly if you exceed the prescribed number of sheets. CHECK 3 DID YOU RAISE THE PAPER REST? Before you load media other than envelopes in the auto sheet feeder, you should always raise the paper rest. If you do not raise the paper rest before loading, the media does not completely enter the paper feed slot during feeding. CHECK 4 IS THE PAPER FOLDED OR CURLED? To avoid misfeeds and paper jams, never load paper in the auto sheet feeder that is folded, curled, or wrinkled. Media Types You Can Use With the Printer Media Types You Cannot Use With the Printer Troubleshooting 359