Canon BJC 3000 User Manual - Page 68
After drying, cover each transparency with one sheet of plain paper, minutes is required for drying.
![]() |
View all Canon BJC 3000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 68 highlights
Using Transparencies 4 Windows Open the Printer Properties dialog box, then select the most appropriate icon in the Choose Print Mode box under the Main tab. Select Transparency in the Media Type box. Also make sure that the BJ Cartridge setting matches the BJ cartridge installed in the printer. Change the settings if necessary. Macintosh Select the most appropriate icon that indicates the print mode in the Printer Properties dialog box. Specify the media type (Transparency), and the BJ cartridge installed in the printer. 5 Start the print job. 6 Remove each printed transparency as it is ejected from the printer. Do not touch the printed side until the ink is completely dry. About 15 minutes is required for drying. Note • After drying, cover each transparency with one sheet of plain paper (uncoated) to prevent sticking and abrasion. Also, cover each transparency if you are storing them in plastic pockets to prevent the transparencies from sticking to the plastic. • Store unused transparencies in the original package in a dry, cool location away from direct sunlight, high temperature, and high humidity. Printing on Paper and Other Media 68
![](/manual_guide/products/canon-bjc-3000-user-manual-dd5eeca/68.png)