Canon DC40 DC40 Instruction Manual - Page 122
Troubleshooting
UPC - 013803041606
View all Canon DC40 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 122 highlights
TTrouble? roubleshooting If you have a problem with your camcorder, refer to this checklist. Consult your dealer or a Canon Service Center if the problem persists. Power Source Problem Solution • Camcorder will not turn on. Battery pack is exhausted. Replace or charge the battery 21 • The camcorder switches off pack. by itself. Attach the battery pack correctly. • The disc compartment cover will not open. • LCD/viewfinder switches on and off. Battery pack will not charge. Charge the battery pack in temperatures between 0 °C and - 40 °C (32 °F and 104 °F). Battery packs become hot with use and may not charge. The - charging will restart once the battery pack temperature is below 40 °C (104 °F). The battery pack is damaged. Use a different battery pack. - Recording/Playback Problem Solution Buttons will not work. Turn on the camcorder. - Load a disc. 31 Abnormal characters appear Disconnect the power source and reconnect it after a short - on the screen. The camcorder time. If the problem still persists, disconnect the power source does not operate properly. and press the RESET button with a pointed item. Pressing the RESET button resets all settings. " " flashes on the screen. Load a disc. 31 " " flashes on the screen. Battery pack is exhausted. Replace or charge the battery 21 pack. The wireless controller will not Set [WL.REMOTE] to [ON]. 83 work. The battery of the wireless controller is exhausted. Replace 25 the battery. Video noise appears on screen. When using the camcorder in a room where a plasma TV is - located, keep a distance between the camcorder and the plasma TV. Video noise appears on the When using the camcorder in a room where a TV is located, - TV screen. keep a distance between the compact power adapter and the power or antenna cables of the TV. Even without a disc loaded, The camcorder is checking if a disc is loaded or not. This is not - when closing the disc a malfunction. compartment cover a motor sound can be heard. The disc cannot be ejected. Turn off the camcorder, disconnect the compact power - adapter and remove the battery pack. Restore the power supply and try again. The camcorder has exceeded its operational temperature. Disconnect the compact power adapter and remove the battery pack and let the camcorder cool down before resuming use. 122