Canon EOS 7D Mark II Advanced Owners Manual - Page 205
Setting the Positioning Interval, Select [Set up]., Select [Position update interval].
View all Canon EOS 7D Mark II manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 205 highlights
Setting the Positioning Interval The interval (time) to update the geotag information can be set. Although updating the geotag information at shorter intervals will make it more accurate, it will reduce the number of possible shots. 1 Select [Set up]. Check that [GPS] is set to [Enable]. Select [Set up], then press . 2 Select [Position update interval]. 3 Set the desired update interval. Select the desired update interval, then press . The shorter the interval, the lower the number of possible shots will be. If you are in a location where the GPS acquisition condition is not good, the number of possible shots will decrease. The nature of GPS may cause some inconsistency in positioning intervals. 205
205
The interval (time) to update the geotag information can be set.
Although updating the geotag information at shorter intervals will make
it more accurate, it will reduce the number of possible shots.
1
Select [Set up].
Check that [
GPS
] is set to [
Enable
].
Select [
Set up
], then press <
0
>.
2
Select [Position update interval].
3
Set the desired update interval.
Select the desired update interval,
then press <
0
>.
Setting the Positioning Interval
The shorter the interval, the lower the number of possible shots will be.
If you are in a location where the GPS acquisition condition is not good,
the number of possible shots will decrease.
The nature of GPS may cause some inconsistency in positioning
intervals.