Canon EOS 7D Mark II Advanced Owners Manual - Page 208
Move the camera., Exit the calibration., you perform this, turn your body
View all Canon EOS 7D Mark II manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 208 highlights
Using the Digital Compass 2 Move the camera. (1) Swing the camera to the left and right by at least 180°. (2) Tilt the camera up and down by at least 180°. (3) Turn the camera by at least 180°. Be careful not to drop the camera. Steps (1), (2), and (3) can be performed in any order. Keep moving the camera until the calibration is completed. If the compass is not calibrated after you perform this, turn your body to the right or left and move the camera again. 3 Exit the calibration. When the calibration is completed, a screen indicating completion will be displayed. Calibration will be completed normally even if the completion message appears while you are still moving the camera in step 2. For safety reasons, detaching the lens from the camera is recommended before you perform the calibration. 208