Canon EOS 7D Mark II Advanced Owners Manual - Page 248
Using a Remote Switch, Remote Control Shooting, Focus on the subject.
View all Canon EOS 7D Mark II manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 248 highlights
F Using a Remote Switch You can connect the Remote Switch RS-80N3 (sold separately) or Timer Remote Controller TC-80N3 (sold separately) or any EOS accessory equipped with an N3-type terminal to the camera for shooting (p.478). To operate the accessory, refer to its instruction manual. 1 Open the terminal cover. 2 Connect the plug to the remote control terminal. Connect the plug as shown in the illustration. To disconnect the plug, grasp the silver part and pull. R Remote Control Shooting With Remote Controller RC-6 (sold separately), you can shoot remotely up to approx. 5 meters/16.4 feet from the camera. You can either shoot immediately or use a 2-sec. delay. You can also use Remote Controller RC-1 and RC-5. 1 Focus on the subject. 2 Set the lens's focus mode switch to . You can also shoot with . 3 Press the button. (9) 248