Canon EOS 7D Mark II Advanced Owners Manual - Page 237
Auto Image Align, Enable, Disable, Adjust dyn, range, Disable HDR
View all Canon EOS 7D Mark II manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 237 highlights
w: HDR (High Dynamic Range) ShootingN When shooting HDR images with [Auto Image Align] set to [Enable], AF point display information (p.359) and Dust Delete Data (p.407) will not be appended to the image. If you perform handheld HDR shooting while [Auto Image Align] is set to [Enable], image periphery will be slightly cropped and resolution will be slightly lowered. Also, if the images cannot be aligned properly due to camera shake, etc., auto image alignment may not take effect. Note that when shooting with excessively bright or dark exposure settings, auto image alignment may not work properly. If you perform handheld HDR shooting while [Auto Image Align] is set to [Disable], the 3 images may not be properly aligned and the HDR effect may be minimal. Using a tripod is recommended. Auto image alignment may not work properly with repetitive patterns (lattice, stripes, etc.) or flat, single-tone images. The color gradation of the sky or white walls may not be reproduced correctly. Irregular colors, irregular exposure or noise may appear. HDR shooting under fluorescent or LED lighting may result in unnatural color reproduction of the illuminated areas. With HDR shooting, the three images will be merged after you take a picture. Therefore, it will take a longer time to record the HDR image to the card than with normal shooting. During the processing of the images, "buSY" will be displayed in the viewfinder and on the LCD panel, and you cannot take another picture until the processing is completed. If you change the shooting mode or switch to movie shooting after setting HDR shooting, HDR shooting setting may be cleared ([Adjust dyn range] setting may be switched to [Disable HDR]). 237