Canon EOS 7D Mark II Advanced Owners Manual - Page 279
Set [Firing group] to, A:B]., Set the A:B flash ratio and shoot.
View all Canon EOS 7D Mark II manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 279 highlights
Using Wireless FlashN [1(A:B)] Multiple slave units in multiple groups You can divide the slave units into groups A and B, and change the flash ratio to obtain the desired lighting effect. Refer to the Speedlite's instruction manual and set one slave unit to firing A B group A and the other to firing group B. Position the Speedlites as shown in the illustration. 1 Set [Firing group] to [1(A:B)]. 2 Set the A:B flash ratio and shoot. Select [A:B fire ratio] and set the flash ratio. The 8:1 to 1:1 to 1:8 flash ratio is equivalent to 3:1 to 1:1 to 1:3 stops (1/2stop increments). 279
279
Using Wireless Flash
N
[
1
(A:B)] Multiple slave units in multiple groups
You can divide the slave units into
groups A and B, and change the flash
ratio to obtain the desired lighting effect.
Refer to the Speedlite’s instruction
manual and set one slave unit to firing
group A and the other to firing group B.
Position the Speedlites as shown in the
illustration.
1
Set [Firing group] to [
1
(A:B)].
2
Set the A:B flash ratio and shoot.
Select [
A:B fire ratio
] and set the
flash ratio.
A
B
The 8:1 to 1:1 to 1:8 flash ratio is equivalent to 3:1 to 1:1 to 1:3 stops (1/2-
stop increments).