Canon EOS 7D Mark II Advanced Owners Manual - Page 349

3 Menu Function Settings [Mirroring] • The movie is displayed on the LCD monitor and via the HDMI output simultaneously. • The HDMI output movie does not show the shooting information, AF frame, and other details (output without an information overlay). If you will leave the camera untouched for more than 30 minutes during HDMI output, select [No mirroring] and set [52: Auto power off] to [Disable] (p.69). If the HDMI movie is output without an information overlay, remaining card capacity, remaining battery capacity, internal temperature warning (p.351), and other warnings will not be displayed on the HDMI output device's screen. Be especially careful if [No mirroring] is set. If [Mirroring] is set, you can check for warnings on the camera's LCD monitor. When you are not shooting movies, the power will turn off automatically after the [52: Auto power off] time elapses. If [Mirroring] is selected and [52: Auto power off] is set to [Disable], HDMI output will stop (movie shooting will stop) if you leave the camera untouched for 30 minutes. Even when [Mirroring] is set, if you play back an image or display a menu, the HDMI movie will not be displayed. Avoid still photo shooting (p.327) while recording the HDMI output to an external recording device. Some external recording devices may not synchronize the time code or audio with movie images, or may produce audio interference, resulting in the movie not being recorded correctly as intended. Depending on the viewing environment, the brightness of the movie shot with the camera may look different from that of the HDMI output movie recorded to an external recording device. By pressing the button, you can change the information displayed. A time code can be appended to the HDMI output movie (p.341). The HDMI output will also output sound (except when [Sound recording] is set to [Off]). 349