Canon EOS 7D Mark II Advanced Owners Manual - Page 416

w Printing 4 Set the printing effects. Set them if necessary. If you do not need to set any printing effects, go to step 5. Contents displayed on the screen differ depending on the printer. Select the setting, then press . Select the desired printing effect, then press . If the icons are displayed brightly, you can also adjust the printing effects (p.418). Printing Effect Description EOn EOff The image will be printed using the printer's standard colors. The image's Exif data is used to make automatic corrections. No automatic correction will be applied. EVIVID The image will be printed with higher saturation to produce more vivid blues and greens. ENR Image noise is reduced before printing. 0 B/W Prints in black-and-white with true blacks. 0 Cool tone Prints in black-and-white with cool, bluish blacks. 0 Warm tone Prints in black-and-white with warm, yellowish blacks. zNatural Prints the image in the actual colors and contrast. No automatic color adjustments are applied. zNatural M Printing characteristics are the same as the "Natural" setting. However, this setting enables finer printing adjustments than with "Natural." EDefault Printing will differ depending on the printer. For details, refer to the printer's instruction manual. * When you change the printing effects, changes are reflected in the image displayed on the upper left of the screen. Note that the printed image may look slightly different from the displayed image, which is only an approximation. This also applies to [Brightness] and [Adjust levels] on page 418. When making a large print of a RAW or RAW+JPEG image, printing a JPEG 73 image created by processing a RAW image (p.398), or printing via Digital Photo Professional (EOS software, p.536) is recommended. 416