Canon EOS 7D Mark II Advanced Owners Manual - Page 265
Built-in Flash Settings, Flash mode, E-TTL II, Manual flash, flash output, MULTI flash, Frequency
View all Canon EOS 7D Mark II manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 265 highlights
3 Setting the FlashN Built-in Flash Settings Flash mode Normally, set this to [E-TTL II]. This enables autoexposure shooting with the built-in flash. To set the flash output level manually, select [Manual flash]. Select [2flash output], then set the flash output level to within 1/1 - 1/128 (1/3-stop increments) before shooting. This mode is for advanced users. With [MULTI flash] selected, you can use a slow shutter speed to capture multiple moments of a moving subject in one image. First set the [2flash output], [Frequency], and [Flash count], then shoot. This mode is for advanced users. To prevent the flash from damage due to overheating, do not use MULTI flash more than ten consecutive times. If you use MULTI flash 10 times, allow the flash to rest for at least 10 min. before firing the flash again. Flash will be output at 1/128 - 1/4 for MULTI flash. 265