Canon EOS 7D Mark II Advanced Owners Manual - Page 93

S Selecting the AF Area and AF PointN Selecting the AF Point Manually You can manually select the AF point or zone. 1 Press the button. X The AF points will be displayed in the viewfinder. In AF point expansion modes, adjacent AF points will also be displayed. In the Zone AF mode, the selected zone will be displayed. 2 Select an AF point. The AF point selection will change in the direction you tilt . If you press straight down, the center AF point (or center zone) will be selected. You can also select a horizontal AF point by turning the dial and select a vertical AF point by turning the dial. In the Zone AF mode, turning the or dial will change the zone in a looping sequence. When [24: Initial AF pt, AI Servo AF] is set to [Initial AF pt selected] (p.127), you can use this method to manually select the AI Servo's AF starting position. When you press the button, the LCD panel displays the following: • 65-point automatic selection AF, Zone AF, Large Zone AF: AF • Single-point Spot AF, Single-point AF, and AF point expansion: SEL (Center)/SEL AF (Off-center) With [25: Manual AF pt. selec. pattern], you can set either [Stops at AF area edges] or [Continuous] (p.129). 93