Canon EOS 7D Mark II Advanced Owners Manual - Page 276
Set [Flash mode] to [E-TTL II]., Set [Wireless func.] to, Set [Channel]., Set [Firing group] to, All].
View all Canon EOS 7D Mark II manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 276 highlights
Using Wireless FlashN 4 Set [Flash mode] to [E-TTL II]. 5 Set [Wireless func.] to [0]. 6 Set [Channel]. Set the channel (1-4) to the same one as the slave unit. 7 Set [Firing group] to [1All]. The slave unit may be set to any firing group (A, B, or C). 8 Fire a test flash. Check that the slave unit is ready to fire, then while the [Built-in flash settings] screen is displayed, press the button. X The slave unit will fire. 9 Take the picture. Set the camera and take the picture in the same way as with normal flash shooting. To terminate wireless flash shooting, set [Wireless func.] to [Disable]. Setting [E-TTL II meter.] to [Evaluative] is recommended. Wireless MULTI flash shooting is not possible. 276
Using Wireless Flash
N
276
4
Set [Flash mode] to [E-TTL II].
5
Set [Wireless func.] to [
0
].
6
Set [Channel].
Set the channel (1-4) to the same one
as the slave unit.
7
Set [Firing group] to [
1
All].
The slave unit may be set to any firing
group (A, B, or C).
8
Fire a test flash.
Check that the slave unit is ready to
fire, then while the [
Built-in flash
settings
] screen is displayed, press
the <
B
> button.
The slave unit will fire.
9
Take the picture.
Set the camera and take the picture
in the same way as with normal flash
shooting.
To terminate wireless flash shooting,
set [
Wireless func.
] to [
Disable
].
Setting [
E-TTL II meter.
] to [
Evaluative
] is recommended.
Wireless MULTI flash shooting is not possible.