Canon EOS 7D Mark II Advanced Owners Manual - Page 209
Setting Time from GPS on the Camera, Select [Set up]., Select [Auto time setting].
View all Canon EOS 7D Mark II manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 209 highlights
Setting Time from GPS on the Camera The time information obtained from GPS signals can be set in the camera. The margin of error is approx. ±1 sec. 1 Select [Set up]. Check that [GPS] is set to [Enable]. Select [Set up], then press . 2 Select [Auto time setting]. 3 Select the desired setting. Select [Auto update] or [Set now], then press . [Auto update] updates the time when the camera is turned on and a GPS signal is received. If signals from at least five GPS satellites cannot be acquired, the time cannot be auto updated. [Set now] will be grayed out and not selectable. Even if [Set now] is selected, updating the time may not be possible due to an unfavorable timing of the GPS signal acquisition. When [Auto time setting] is set to [Auto update], the date or time cannot be manually set with [Date/Time/Zone] under the [52] tab. If you use Wireless Transmitter WFT-E7 (Ver. 2/sold separately) and do not want to change the time after performing [Sync time between cameras], set [Auto time setting] to [Disable] in step 2. 209