Canon MK 2600 Mk2600 Users Guide

Canon MK 2600 Manual

Get Canon MK 2600 PDF manuals and user guides View all Canon MK 2600 manuals
Add to My Manuals
Save this manual to your list of manuals

Canon MK 2600 manual content summary:

  • Canon MK 2600 | Mk2600 Users Guide - Page 1
    User's Guide Please read this guide before operating this product. After you finish reading this guide, store it in a safe place for future reference.
  • Canon MK 2600 | Mk2600 Users Guide - Page 2
    is subject to change without notice. • In no event shall CANON FINETECH NISCA INC. bear any responsibility for any direct or indirect damages arising dealer. • It is recommended that the data created and saved with this printer be stored in another storage device such as the hard disk of the
  • Canon MK 2600 | Mk2600 Users Guide - Page 3
    labels to identify switches. The printer is used to print such labels and tube. Tube Label Clear laminate seal Easy yet high-quality printing Printing tube The Mk2600 can print tube that identify cables: "AB01" or "+20V", for example. Because the tube that is used is available commercially
  • Canon MK 2600 | Mk2600 Users Guide - Page 4
    segments and five "3mm 100%" characters are printed in the half cutting mode. (This feature is available only for printing on tube.) 3 Supports a variety of printing media The printer can print on tube, label tape, heat shrink tube, wrap around tape, plate and 4mm I.D. strip. (To print on other than
  • Canon MK 2600 | Mk2600 Users Guide - Page 5
    Contents Explanation of Symbols 4 Safety Precautions 5 Quick Guide to Using the Printer 12 Contents Part 1 Before You Begin (Preparation) 1.1 Names and Functions of Parts........... 18 Main 2.3 Printing on Wrap around Tape 43 Installing cassettes 43 Install the wrap around tape guide 44 1
  • Canon MK 2600 | Mk2600 Users Guide - Page 6
    130 Reducing the cutting speed 132 5.3 Replacing the Cutter 133 5.4 Replacing the Cassette 136 Replacing the ribbon cassette 136 Replacing a tube or the label tape cassette 137 5.5 Maintenance 138 Cleaning the printer 138 Cleaning the transport rollers 138 Cleaning the print head 140 2
  • Canon MK 2600 | Mk2600 Users Guide - Page 7
    Cleaning/Replacing the tube cleaner for attachment 140 Part 6 Appendices 6.1 Consumable Supplies and Options 142 Consumable supplies 142 Options 143 6.2 Message List 144 6.3 Troubleshooting 147 6.4 List of Symbols 150 6.5 List of Function 151 6.6 Main Specifications 152 Contents 3
  • Canon MK 2600 | Mk2600 Users Guide - Page 8
    of the symbols that are used in this manual are explained below. WARNING A precaution to be followed to use the printer in safe is written. Failure to follow the printer or damage other products. Be sure to follow it. An important notice or restriction to be followed to prevent troubles due to
  • Canon MK 2600 | Mk2600 Users Guide - Page 9
    Safety Precautions Safety Precautions In order to ensure safe operation of the printer, be certain to observe the following safety precautions. The shape of the power plug varies according to country. WARNING Do not disassemble or modify the
  • Canon MK 2600 | Mk2600 Users Guide - Page 10
    Always keep the AC plug clean Clean the AC adapter plug periodically. If dust, dirt, soot, etc., is allowed to accumulate on the plug, the dust could absorb moisture, creating an insulation fault that could cause a fire. Do not continue to use the unit if an abnormality develops If the unit begins
  • Canon MK 2600 | Mk2600 Users Guide - Page 11
    the included AC adapter (N14584) and cord. Using any AC adapter or cord other than the included one can result in fire, electric shock, or printer failure. Do not use the included AC adapter for any other product. Fire or electric shock can result. When it thunders at a short distance, remove
  • Canon MK 2600 | Mk2600 Users Guide - Page 12
    in the opening for the AC adapter, cutter section, or inside the printer. Otherwise it may cause fire, electrical shock, machine failure, or injury. cup containing water or fluid. Touching the electrical parts inside the printer can cause short circuit and may result in fire or electrical shock
  • Canon MK 2600 | Mk2600 Users Guide - Page 13
    read this manual thoroughly and handle the cutter carefully. Keep small children away from the consumable Always keep the consumable such as ribbon cassette, cleaner , etc., out of the reach of small children to avoid accidents. Securely hold the handle of the printer To
  • Canon MK 2600 | Mk2600 Users Guide - Page 14
    Do not handle the keyboard roughly when typing. Rough handling could result in damage to the unit. Do not re-use ribbons or label tape Do not attempt to re-use ribbons or label tape. Doing so could damage the unit. Do not attempt to pull tube out Do not pull on
  • Canon MK 2600 | Mk2600 Users Guide - Page 15
    on tube or labels. This unit cannot print directly on wires or cables, so do not attempt to feed wires or cables into the unit. Doing so could result in damage to the unit. for a long time Do not leave the printer in a sun-heated vehicle or any other extreme environment for an extended period. 11
  • Canon MK 2600 | Mk2600 Users Guide - Page 16
    Guide to Using the Printer This section explains the basic use of the printer for people who want to start using it quickly. Although the printer manual for more specific details on the functions of the printer Install the ribbon cassette. • Remove the stopper and take up any slack in the ribbon. •
  • Canon MK 2600 | Mk2600 Users Guide - Page 17
    Quick Guide to Using the Printer 5 Install the tube attachment. • Align the hooks on the tube attachment with the holes in the printer. • Push the tube attachment in until it clicks into the place the power switch. • Character input display appears after displaying the ribbon cassette information. 13
  • Canon MK 2600 | Mk2600 Users Guide - Page 18
    Inputting Characters [Example] Printing "C-2" on a 3.0mm-diameter tube Printed results 9 While holding down [Shift], press [C]. 10 Press [-]. - 11 Press [2]. If you accidentally input an incorrect character ex. Although you meant to enter "C-2", you entered "C=2" by mistake. 1 Press [ ] and [ ], and
  • Canon MK 2600 | Mk2600 Users Guide - Page 19
    Printing Quick Guide to Using the Printer 12 Press [Print]. • Make sure that "Tube" is selected. "No ribbon cassette" is displayed if the ribbon cassette is not installed. Install the ribbon cassette. "No ribbon information. No ribbon amount displayed. Press enter" is displayed if the information
  • Canon MK 2600 | Mk2600 Users Guide - Page 20
    16
  • Canon MK 2600 | Mk2600 Users Guide - Page 21
    Part 1 Before You Begin (Preparation) This section describes preparations and some things you should know before entering characters. 1.1 Names and Functions of Parts 18 Main Unit 18 LCD screen 20 Keyboard 22 1.2 Connecting the AC Adapter 24 1.3 Use the PC Connection Kit.. 26
  • Canon MK 2600 | Mk2600 Users Guide - Page 22
    1.1 Names and Functions of Parts Main Unit *Removing the wrap around tape guide To print to other media, remove the wrap around tape guide . 1. Pull out the cutter. 2. Pull out the wrap-around tape guide. 3. Reinstall the cutter. 18
  • Canon MK 2600 | Mk2600 Users Guide - Page 23
    this cover to connect the USB cables of the PC connection kit. Wrap around tape guide This guide is installed when printing on wrap around tape. Remove it when printing to other media. Handle Hold this handle when carrying the printer. Connector for ribbon cassette This is to read out information
  • Canon MK 2600 | Mk2600 Users Guide - Page 24
    LCD screen Caps Lock Indicates whether the Caps Lock mode is active. : Active, so all alphabetic characters are entered in uppercase. (no indication): Normal(inactive) Insert/Overwrite mode indicator Indicates which of the two input modes is selected: insert mode or overwrite mode. : Insert mode (
  • Canon MK 2600 | Mk2600 Users Guide - Page 25
    Printing orientation indicator Indicates which printing orientation has been selected: "horizontal/horizontal character", "vertical/vertical character", or "vertical/ horizontal character". H/H: Horizontal/horizontal character V/V: Vertical/vertical character V/H: Vertical/horizontal character Frame
  • Canon MK 2600 | Mk2600 Users Guide - Page 26
    key to save text data that has been input, and to retrieve saved data. [PC Conn] Use this key when the printer is connected to the PC using the USB cable contained in the PC connection kit. [Func] Use this key to adjust the printing density ( page 113), to select the printing
  • Canon MK 2600 | Mk2600 Users Guide - Page 27
    input display. To cancel the current printing operation immediately, without waiting for the printing or cutting operation to end, hold down this key until the printer begins to beep. [Back Space] Use this key to delete character data that has been input. Each time this key is pressed, the character
  • Canon MK 2600 | Mk2600 Users Guide - Page 28
    power switch is off. 2 Plug the power cord into the AC adapter (N14584). Plug it in all the way. 3 Plug the AC adapter into the printer. 4 Plug the AC adapter power plug into a 100-240V power outlet. Plug it in all the way. The shape of the power plug varies according
  • Canon MK 2600 | Mk2600 Users Guide - Page 29
    than the included one Never use any other AC adaptor or cord than the included one. Using it can result in fire, electric shock, or printer failure. Do not use the included AC adapter for any other product. Fire or electric shock can result. Use a 100-240V AC power supply Use
  • Canon MK 2600 | Mk2600 Users Guide - Page 30
    the PC connection kit, refer to "Application Software for Mk2600" and the printer driver contained in the included Software CDROM. To use the PC connection kit, connect the printer to the PC as shown. 1 Connect the printer to the PC using the included USB cable. • Insert the type-B (square) plug of
  • Canon MK 2600 | Mk2600 Users Guide - Page 31
    the power switch on......39 Input characters 40 Print 42 2.3 Printing on Wrap around Tape 43 Installing cassettes 43 Install the wrap around tape guide 44 Turn the power switch on......45 Input characters 46 Print 46 2.4 Printing on Plates 48 Install cassette 48 Insert plate 50 Turn
  • Canon MK 2600 | Mk2600 Users Guide - Page 32
    the cover. 2 Take up any slack in the ribbon. • Remove the stopper and then take up any slack in the ribbon. The printer cannot detect the ribbon if it has any slack. Always be sure to take up slack in the ribbon when installing the ribbon cassette. Dispose the removed stopper according to local
  • Canon MK 2600 | Mk2600 Users Guide - Page 33
    around tape guide. • page 18. 6 Close the cover. • Close the cover completely so that it clicks shut. Ink ribbon cassette and tube attachment The ink ribbon cassette and tube attachment shown below are supplied with the printer. Ink ribbon cassette The ink ribbon cassette contains a ribbon that
  • Canon MK 2600 | Mk2600 Users Guide - Page 34
    with a diameter ranging from 2.5mm to 6.5mm. Note that the printer will not print properly on tube that is bumpy, dirty, or of supply has run out. When the tube supply has run out, hold down [Canc] until the printer beeps. When using a tube reel Adjust the tube reel so that the load does not exceed
  • Canon MK 2600 | Mk2600 Users Guide - Page 35
    cassette information. The character input display appears immediately if no ribbon cassette is installed. * If the display remains blank, refer to "Troubleshooting" ( page 147). Ribbon cassette information display Do not turn the power switch on and off rapidly Turning the power switch on and
  • Canon MK 2600 | Mk2600 Users Guide - Page 36
    Input characters ex. Print four each of the following tube segments. Tube to be used: φ3.0mm 1 Input "200V" To input uppercase letters or the characters appearing on the upper half of the keycaps, press and hold the [Shift] key, and then press the desired key. If you input a wrong character by
  • Canon MK 2600 | Mk2600 Users Guide - Page 37
    Basic Operations Part 2 If you accidentally input an incorrect character Follow the procedure described below to make changes if you accidentally input an incorrect character. ex. You meant to input "200V" but accidentally input "240V" 1. Press [◄] or [►] and move the cursor (n) to the "4". 2. Press
  • Canon MK 2600 | Mk2600 Users Guide - Page 38
    following display, where you can check how much space is available. Currently used capacity Free capacity What is a page? As used in relation to the printer, the term "page" has special meaning. The text entries "200V", "Pump Room" and "A1" that were input in the procedure described on page 32
  • Canon MK 2600 | Mk2600 Users Guide - Page 39
    be read due to the ribbon cassette failure and so forth. If this message is displayed, follow the instruction on the screen. What is cut tube is ejected. If a tube jams Hold down [Canc] until the printer beeps. The printer stops all operations immediately. In this case, the tube is not cut and
  • Canon MK 2600 | Mk2600 Users Guide - Page 40
    Open the cover. 2 Take up any slack in the ribbon. • Remove the stopper and then take up any slack in the ribbon. The printer cannot detect the ribbon if it has any slack in the ribbon. Always be sure to take up slack in the ribbon when installing a cassette. Dispose the removed stopper according to
  • Canon MK 2600 | Mk2600 Users Guide - Page 41
    3 Install the ribbon cassette into the printer. • Push the cassette in until it clicks into the place. If the ribbon cassette is loose, the ribbon may not be detected, so be sure to press it in until it clicks. Basic Operations Part 2 CAUTION Do not touch the connector (metal part)
  • Canon MK 2600 | Mk2600 Users Guide - Page 42
    printing on wrap around tape Install the ribbon cassette, the wrap around tape cassette and wrap around tape guide in the machine. The tube attachment the cassette, the message "Start of media not detect." appears and the printer can not print. This message can be cleared by pressing [Canc]. Fig.
  • Canon MK 2600 | Mk2600 Users Guide - Page 43
    cassette information. The character input display appears immediately if no ribbon cassette is installed. * If the display remains blank, refer to "Troubleshooting" ( page 147). Ribbon cassette information display Do not turn the power switch on and off rapidly Turning the power switch on and
  • Canon MK 2600 | Mk2600 Users Guide - Page 44
    Input characters ex. Print the following label tape. Label tape being used: 9mm label tape 1 Input "10W". If you accidentally input an incorrect character, press [Back Space] to delete the character and then input the correct one. 2 Press [Enter]. • A new page appears, and the system waits for
  • Canon MK 2600 | Mk2600 Users Guide - Page 45
    6 Press either [▼] or [►]. If you press [Enter] instead of [▼] or [►], a new page is created. 7 Input "-12V". Basic Operations Part 2 The cursor moves to the second line. 8 Press [Enter]. • A new page appears, and the system waits for input of more character data. 9 Press [Set Lines]. • Since the
  • Canon MK 2600 | Mk2600 Users Guide - Page 46
    be read due to the ribbon cassette failure and so forth. If this message is displayed, follow the instruction on the screen. What is label is ejected. If label tape jams Hold down [Cancel] until the printer beeps. The printer stops all operations immediately. In this case, the label tape is not cut
  • Canon MK 2600 | Mk2600 Users Guide - Page 47
    the destinations of cables. Prepare a guide Turn the power switch on Input characters Print Installing cassettes Install a ribbon cassette and the wrap around tape cassette. 1 Open the cover. 2 Take up any slack in the ribbon. • Remove the stopper and then take up any slack in the ribbon. The printer
  • Canon MK 2600 | Mk2600 Users Guide - Page 48
    tab on the wrap around tape cassette with the hole in the printer, and then push the cassette in until it clicks into the place. Install the wrap around tape guide Install the wrap around tape guide If the wrap around tape guide has been installed, verify that it is installed correctly. 1 Pull out
  • Canon MK 2600 | Mk2600 Users Guide - Page 49
    cassette information. Startup display The character input display appears immediately if no ribbon cassette is installed. * If the display remains blank, refer to "Troubleshooting" ( page 147). Ribbon cassette information display Do not turn the power switch on and off rapidly Turning the power
  • Canon MK 2600 | Mk2600 Users Guide - Page 50
    cannot be read due to the ribbon cassette failure and so forth. If this message is displayed, follow the instruction on the screen. What is cut tape is ejected. If tape jams Hold down [Cancel] until the printer beeps. The printer stops all operations immediately. In this case, the tape is not cut and
  • Canon MK 2600 | Mk2600 Users Guide - Page 51
    sufficiently. We therefore recommend using with cable of φ3 to φ7.6 mm. 2. Attach the tape to the cable as shown in the diagram, starting fingers If the remaining part cannot be separated, adjust the cutting depth. CANON FINETECH NISCA INC. shall not be responsible for damages that might result from
  • Canon MK 2600 | Mk2600 Users Guide - Page 52
    cassette. • Remove the stopper and then take up any slack in the ribbon. The printer cannot detect the ribbon if it has any slack in the ribbon. Always be sure to take up slack in the ribbon when installing the ribbon cassette. Dispose the removed stopper according to local government regulation. 48
  • Canon MK 2600 | Mk2600 Users Guide - Page 53
    the holes in the printer, and then push the plate attachment in until it clicks into the place. 5 Remove the wraparound tape guide. • page 18. 6 Close the cover. • Close the cover completely so that it clicks shut. Use only a plate ink ribbon cassette! A special ribbon cassette is required for
  • Canon MK 2600 | Mk2600 Users Guide - Page 54
    Insert plate Plates are not provided with the printer; they must be purchased separately. The printer can print on from 8.0mm to 10mm plates. Note that the printer will not print properly on plates that are bumpy, dirty or of uneven thickness. 1 Open the cover. 2 Insert a plate. • Insert the plate
  • Canon MK 2600 | Mk2600 Users Guide - Page 55
    cassette information. The character input display appears immediately if no ribbon cassette is installed. * If the display remains blank, refer to "Troubleshooting" ( page 147). Ribbon cassette information display Do not turn the power switch on and off rapidly Turning the power switch on and
  • Canon MK 2600 | Mk2600 Users Guide - Page 56
    Input characters ex. Print the following plates. Plate being used: 8mm plate 1 Press [Set Lines]. • Since the first plate has two lines, press [Set Lines] to change the Lines setting. 2 Press [▲] or [▼] to select "2 lines" and then press [Enter]. An "×" appears next to number of lines that are not
  • Canon MK 2600 | Mk2600 Users Guide - Page 57
    7 Press [Set Lines]. • Since the second plate has just one line, press [Set Lines] to change the Line setting for the second plate. 8 Press [▲] or [▼] to select "1 lines" and then press [Enter]. Basic Operations Part 2 A check mark indicates the number of lines that is currently selected. 9 Input
  • Canon MK 2600 | Mk2600 Users Guide - Page 58
    15 Input "C-2". 16 Press [Set Cut]. • The Set cut selection display appears. 17 Press [▲] or [▼] to select "Half cut" and then press [Enter]. • The Half cut selection display appears. 18 Press [▲] or [▼] to select "Off" and then press [Enter]. • The Cut line selection display appears. 19 Press [▲]
  • Canon MK 2600 | Mk2600 Users Guide - Page 59
    cannot be read due to the ribbon cassette failure and so forth. If this message is displayed, follow the instruction on the screen. What is "print with scissors. If a plate jams Hold down [Canc] until the printer beeps. The printer stops all operations immediately. Refer to "If a Tube or Label Tape
  • Canon MK 2600 | Mk2600 Users Guide - Page 60
    56
  • Canon MK 2600 | Mk2600 Users Guide - Page 61
    Part 3 Character Input This section explains how to input characters and symbols, and how to delete and change characters. 3.1 Inputting Characters 58 Inputting characters 58 3.2 Inputting Symbols 59 Inputting symbols 59 3.3 Deleting Characters, Creating New Pages, Moving the Cursor 61 Deleting
  • Canon MK 2600 | Mk2600 Users Guide - Page 62
    3.1 Inputting Characters Inputting characters Input the following characters: ex. Res 7-1 1 Input "Res 7-1". To input uppercase letters or the characters that appear on the top half of the keycaps, hold down the [Shift] key while pressing the desired key. If you input an incorrect character Press [
  • Canon MK 2600 | Mk2600 Users Guide - Page 63
    3.2 Inputting Symbols Inputting symbols Input the following characters: ex. 250Ω When the character size is set to 1.3 mm, no symbol can be entered. 1 Press [Symbol 2]. • The symbol selection display appears. 2 Press or [▼] to select " ". Character Input Part 3 3 Press [Enter]. If you input an
  • Canon MK 2600 | Mk2600 Users Guide - Page 64
    8 Press [Enter]. If you input an incorrect symbol Delete the symbol by holding down the [Alt] key while pressing [Back Space] and then input the correct one. You can also move the cursor by holding down the [Alt] key while pressing [◄] or [►]. 9 Hold down [Alt] and press [Enter]. • This inputs the
  • Canon MK 2600 | Mk2600 Users Guide - Page 65
    Character Input Part 3 3.3 Deleting Characters, Creating New Pages, Moving the Cursor Deleting or changing characters There are two methods for deleting characters: one uses the [Back Space] key, and the other uses the [Del] key. ex. Change "-27V" to "+24V" 1 Move the cursor to the "2" to the right
  • Canon MK 2600 | Mk2600 Users Guide - Page 66
    Deleting all entered text data It is possible to delete all text on all pages in a single operation. There are two alternatives: "Text only" or "Text + settings." Text only This operation deletes the text on all pages, but leaves the settings from the final page. Text + settings This operation
  • Canon MK 2600 | Mk2600 Users Guide - Page 67
    Character Input Part 3 Insert mode and overwrite mode Press the [Ins] key to toggle between "insert mode" and "overwrite mode." To determine which is the current mode, check the upper left corner of the display. If the insert mark ( ) appears, input is in the insert mode; otherwise, input is in the
  • Canon MK 2600 | Mk2600 Users Guide - Page 68
    Creating a new page In order to print three tube segments as shown below, a total of three pages of character data must be created. This is accomplished by creating a page break between each page of text data. When a page break is created, a new page is created automatically. 1 Input "200V". 2
  • Canon MK 2600 | Mk2600 Users Guide - Page 69
    Character Input Part 3 Moving the cursor The cursor can be moved to the beginning of the line, to the end of the line, or to the preceding or following page. Moving to the beginning of the line • Press [Shift] + [▲] . Moving to the end of the line • Press [Shift] + [▼]. The cursor moves to the
  • Canon MK 2600 | Mk2600 Users Guide - Page 70
    66
  • Canon MK 2600 | Mk2600 Users Guide - Page 71
    Part 4 Advanced Operations This chapter explains how to change characters and the number of lines, how to edit pages, how to save text data, and how to perform various printing functions. 4.1 Changing the Characters and the Number of Lines........... 68 Changing character size 68 Changing the
  • Canon MK 2600 | Mk2600 Users Guide - Page 72
    4.1 Changing the Characters and the Number of Lines This section explains various character and line-related functions, such as changing the size of printed characters, widening the spacing between characters, and printing on two lines. Changing character size It is possible to change the size and
  • Canon MK 2600 | Mk2600 Users Guide - Page 73
    Advanced Operations Part 4 Changing the spacing between characters The spacing between printed characters can be changed as desired. There are three possible spacings of printed characters, as shown below. Initially, "Narrow" is selected. The spacing between printed characters can be changed for
  • Canon MK 2600 | Mk2600 Users Guide - Page 74
    "6" and "9" In order to make it easier to distinguish sixes and nines, both characters can be printed with an underline. Initially, the printer prints sixes and nines without an underline. This function cannot be changed for individual pages. 1 Input the characters. 2 Press [Func]. • The Settings
  • Canon MK 2600 | Mk2600 Users Guide - Page 75
    Advanced Operations Part 4 Adding a frame to characters It is possible to add various types of frames to characters as shown below. Initially, the printer is set to print without frames. Different types of frames can be specified for individual pages. When the segment length is shorter than 6 mm,
  • Canon MK 2600 | Mk2600 Users Guide - Page 76
    12V". The characters are input on the first line. The cursor moves to the second line. 6 Press [Enter]. • A new page is created, and the printer waits for the next character to be input. Indicates that another page precedes the currently displayed page. 7 Press [Char Size]. • The Character Size
  • Canon MK 2600 | Mk2600 Users Guide - Page 77
    8 Press [▲] to select "1.3mm 100%", and then press [Enter]. • The display returns to the character input display. Advanced Operations Part 4 When printing characters on three lines, set the character size to "1.3 mm" before selecting "Number of lines". You can select the "3 lines" only when the
  • Canon MK 2600 | Mk2600 Users Guide - Page 78
    4.2 Editing Pages Pages Assume that we want to create three tube segments as shown below. First, we input "200V" on the character input display, and this character data is automatically placed on the first page. After the characters have been input, pressing [Enter] creates a new (second) page; we
  • Canon MK 2600 | Mk2600 Users Guide - Page 79
    Advanced Operations Part 4 Copying and pasting pages It is possible to copy an entire page of character data and paste it onto a new page immediately before or after another existing page. ex. Paste the character data "200V" from page 1 to a new page immediately following page 2. 1 Press [Shift] +
  • Canon MK 2600 | Mk2600 Users Guide - Page 80
    4 Press [◄] or [►] to select "Yes", and then press [Enter]. • After the display shown at right is displayed, the character input display re-appears. This indicates that the character data from page 1 has been copied. 5 Press [Edit]. • The Page Edit display appears. 6 Press [▲] or [▼] to select "
  • Canon MK 2600 | Mk2600 Users Guide - Page 81
    Advanced Operations Part 4 Cutting and pasting pages It is possible to cut an entire page of character data and paste it onto a new page immediately before or after another existing page. Use this function to move a page. ex. Cut the character data "Pump Room" from page 2 to a new page following the
  • Canon MK 2600 | Mk2600 Users Guide - Page 82
    4 Press [◄] or [►] to select "Yes", and then press [Enter]. • After the display shown at right appears, display returns to the character input display. This indicates that the character data from page 2 has been cut. 5 Press [Edit]. • The Page Edit display appears. 6 Press [▲] or [▼] to select "
  • Canon MK 2600 | Mk2600 Users Guide - Page 83
    Advanced Operations Part 4 Inserting pages It is possible to insert blank pages. Use this function if you want to insert a new page in a specific location after you have already input character data for several pages. ex. Insert a blank page between page 1 and page 2. 1 Press [Shift] + [◄] or [Shift
  • Canon MK 2600 | Mk2600 Users Guide - Page 84
    Deleting pages It is possible to delete specific pages. If you delete a page, the character data that was input on that page is also deleted. ex. Delete page 2. 1 Press [Shift] + [◄] or [Shift] + [►] and display the page to be deleted. • Display the character data on page 2. You can press [Page] to
  • Canon MK 2600 | Mk2600 Users Guide - Page 85
    Dividing pages Data entered in two lines on one page can be divided into two pages. Advanced Operations Part 4 The first line becomes the first page, and the second line the second page. ex. On all pages, data entered in two lines is divided into separate pages. 1 Press [Edit]. • The Page Edit
  • Canon MK 2600 | Mk2600 Users Guide - Page 86
    Dividing at a specified page ex. Divide only the third page. 1. Move the cursor (■) to the first page you want to divide. 2. Press [Edit]. • The Page Edit display appears. 3. Press [▲] or [▼] to select "Division", and then press [Enter]. • The Page division selection display appears. 4. Press [▲] or
  • Canon MK 2600 | Mk2600 Users Guide - Page 87
    Combining pages Two pages of data can be combined into two lines on a single page. Advanced Operations Part 4 Data from the earlier page is on the first line, and that on the latter page is on the second line. ex. Six pages of data is combined into three pages. 1 Press [Edit]. • The Page Edit
  • Canon MK 2600 | Mk2600 Users Guide - Page 88
    Combining from a specified page ex. Combine only the third through sixth pages. 1. Move the cursor (■) to the first page you want to combine. 2. Press [Edit]. • The Page Edit display appears. 3. Press [▲] or [▼] to select "Combining", and then press [Enter]. • The Page combining selection display
  • Canon MK 2600 | Mk2600 Users Guide - Page 89
    Folders You can save character data that you have created in "files" in the printer's internal memory. When you save a file, you have to assign it a allow you to quickly identify the data that is stored in that file. The printer also has three preset folders; when you save a file, you can save the
  • Canon MK 2600 | Mk2600 Users Guide - Page 90
    Saving character data Character data that has been created can be stored in files. A total of approximately 60,000 characters of character data can be saved. For example, if you have already saved a file containing 50 characters, an additional 59,950 characters can be saved. ex. Save the character
  • Canon MK 2600 | Mk2600 Users Guide - Page 91
    Advanced Operations Part 4 Do not turn the power off during file saving. Turning the power off during file saving can damage data. The maximum number of files that can be saved is 99 The maximum number of files that can be saved in one folder is 99. If an attempt is made to save more than 99 files
  • Canon MK 2600 | Mk2600 Users Guide - Page 92
    Loading character data There are two methods for retrieving character data that has been stored in files: "New" and "Add". Loading with "New" When character data (file) is retrieved, the character data that is currently displayed is deleted and is replaced with the retrieved character data. Loading
  • Canon MK 2600 | Mk2600 Users Guide - Page 93
    4 Press [▲] or [▼] to select "Text + settings", and then press [Enter]. • The Choose Folder display appears. Advanced Operations Part 4 5 Press [▲] or [▼] to select "Folder 2", and then press [Enter]. • The Choose File display appears. If no files have been saved in the selected folder, the
  • Canon MK 2600 | Mk2600 Users Guide - Page 94
    Deleting character data It is possible to delete character data files that have been saved. There are three different modes for deleting files: "One file", "Folder contents" and "All files". One file Deletes only one file in a folder. Folder contents Deletes all files within a folder. All files
  • Canon MK 2600 | Mk2600 Users Guide - Page 95
    5 Press [▲] or [▼] to select "Switch 1", and then press [Enter]. • The deletion confirmation display appears. Advanced Operations Part 4 6 Press [◄] or [►] to select "Yes", and then press [Enter]. • After the display at right appears, the display returns to the character input display. 91
  • Canon MK 2600 | Mk2600 Users Guide - Page 96
    Renaming a folder Although the printer has ten predefined folders ("Folder 1" to "Folder 10"), these folders can be renamed freely. ex. Rename "Folder 2" as "BREAKERS". 1 Press [File]. • The file operation selection
  • Canon MK 2600 | Mk2600 Users Guide - Page 97
    Advanced Operations Part 4 Restoring the original folder name To restore the original folder names ("Folder 1" to "Folder 10") when the folder names have been changed, follow the procedure described below. ex. Restore the name "Folder 2" to the folder named "BREAKERS". 1. Press [File]. • The file
  • Canon MK 2600 | Mk2600 Users Guide - Page 98
    4.4 Various Printing Functions Printing count and printing range For the sake of example, assume that the following character data for printing three tube segments has been input. If "3" is set as the sets to print, tube segments are printed as shown below. In short, the three pages of character
  • Canon MK 2600 | Mk2600 Users Guide - Page 99
    Advanced Operations Part 4 ex. Create the character data shown below and then use that data to produce tube segments as shown in the example below by printing the character data from pages 2 to 4 as follows. 1 Press [Print]. • The Print Media selection display appears. 2 Press [▲] or [▼] to select
  • Canon MK 2600 | Mk2600 Users Guide - Page 100
    aborted. In this case, the tube that is currently being printed is cut and then ejected. If a tube jams Hold down [Canc] until the printer beeps. The printer stops all operations immediately. In this case, the tube is not cut and it is not ejected. Refer to "If a Tube or Label tape
  • Canon MK 2600 | Mk2600 Users Guide - Page 101
    Advanced Operations Part 4 Changing the printing orientation It is possible to print characters with their orientation changed as shown below. And it is also possible to change the orientation on a page basis or for all pages together after entering characters. If entered characters are expected to
  • Canon MK 2600 | Mk2600 Users Guide - Page 102
    5 Input "12V". 6 Press [▼] or [►] . If you press [Enter] instead of [▼] or [►], a new page is created. 7 Input "24V". Confirm that the characters that are input are displayed on their side. The cursor moves to the second line. 8 Press [Print]. • The Print Media selection display appears. 9 Press
  • Canon MK 2600 | Mk2600 Users Guide - Page 103
    change depending on the media type. Refer to "List of Function" ( page 151). Depending on print media characteristics and the environment in which the printer is being used, the segment length and the margins may vary slightly from the set values. The settings should only be considered as guidelines
  • Canon MK 2600 | Mk2600 Users Guide - Page 104
    as the margin. 1 Press [Seg Len]. • The segment length selection display appears. When the specified segment length is shorter than 8.5 mm, the printer specifications change depending on the media type. Refer to "List of Function" ( page 151). 2 Press [▲] or [▼] to select "Specify", and then input
  • Canon MK 2600 | Mk2600 Users Guide - Page 105
    6 Input character data in accordance with conditions. • "Changing character size" ( page 68) • "Changing the spacing between characters" ( page 69) Advanced Operations Part 4 7 Perform the printing operation. Character Character size space Changing segment length of all pages If "All" is
  • Canon MK 2600 | Mk2600 Users Guide - Page 106
    4. Press [◄] or [►] to select the adjust-ment value, and then press [Enter]. • The correction value can be specified with the [+] or [-] key and numeric keys. You can input a correction value for negative correction. However, if there is no correction space (part other than characters), no more
  • Canon MK 2600 | Mk2600 Users Guide - Page 107
    Advanced Operations Part 4 Printing a specific page multiple times (Continuous Print) Assume that you want to produce the following tube segments. The number of continuous printings can be set from 1 to 100 for each page. Fig. 1 In this case, it might seem acceptable to create the character data
  • Canon MK 2600 | Mk2600 Users Guide - Page 108
    4 Press [▲] or [▼] to select "Set count", and then input "3" (continuous printing count). If you accidentally input an incorrect number, press [Back Space] to delete the number and then input the correct one. 5 Press [Enter]. • The display returns to the character input display. Range of values
  • Canon MK 2600 | Mk2600 Users Guide - Page 109
    Advanced Operations Part 4 Printing text with sequential numbers (Numbering print) Assume that you want to produce the following tubes. Serial characters can be set in only one place on a page. Fig. 1 The portion of the character data consisting of numbers from 1 to 10 is incremented (or decremented
  • Canon MK 2600 | Mk2600 Users Guide - Page 110
    3 Press [▲] or [▼] to select "Decimal", and then press [Enter]. • The decimal numbering setting display appears. In addition to decimal numbering, you can also specify hexadecimal or alphabetical numbering. For details, refer to Memo on the next page, "Various types of numbered printing". If you
  • Canon MK 2600 | Mk2600 Users Guide - Page 111
    Advanced Operations Part 4 Various types of numbering print The following different types of numbering print are possible. The selection of the type is made in step 3 on the preceding page. For decimal numbering: Select "Decimal" in step 3. For hexadecimal numbering: Select "Hexadecimal" in step 3.
  • Canon MK 2600 | Mk2600 Users Guide - Page 112
    Adjusting the printing start position and vertical position When printing, enviromental factors or characteristics of the print media may cause printing to start slightly out of position or to be shifted slightly in the vertical direction so that character data is not printed correctly, even though
  • Canon MK 2600 | Mk2600 Users Guide - Page 113
    4 Press [►] four times; "Right 1.0mm" is displayed. • Pressing [►] increases the value in steps of 0.25mm. Press [◄] to move the printing start position to the left. The printing start position can be adjusted up to 2.5 mm to the left or right. 5 Press [Enter]. • The display returns to the character
  • Canon MK 2600 | Mk2600 Users Guide - Page 114
    Printing centerlines When printing two lines per page, a centerline can be printed between the lines. This function cannot be changed from one page to another. Centerlines cannot be printed on pages with only one line or three lines. ex. Print the centerline as follows. 1 Press [Func]. • The
  • Canon MK 2600 | Mk2600 Users Guide - Page 115
    Advanced Operations Part 4 Printing with short pitch width By selecting "Expansion" on the Plate Printing Area selection display and selecting character size and number of lines accordingly, the printable number of characters within the short pitch will increase. If "Expansion" is selected on the
  • Canon MK 2600 | Mk2600 Users Guide - Page 116
    4 Input characters. • Input "A-123", press [▼], and then input "R11". • Perform the printing operation. • Only 1.3mm double-byte characters can be set to three lines. • The maximum number of printable characters depends on segment length setting. If you wish to increase the number of printable
  • Canon MK 2600 | Mk2600 Users Guide - Page 117
    Operations Part 4 Adjusting the printing density Printing may be too dark or too light in some cases, depending on the environment in which the printer is used and the characteristics of the print media. In such cases, adjust the printing density. The printing density can be adjusted to five
  • Canon MK 2600 | Mk2600 Users Guide - Page 118
    the printing speed It is possible to change the printing speed. However, if the printing speed is too fast for the environment in which the printer is used and the characteristics of the print media, printing may shift out of position or be otherwise affected. The print speed can be set
  • Canon MK 2600 | Mk2600 Users Guide - Page 119
    Advanced Operations Part 4 4.5 Changing the Cutting Method Half cuts and full cuts If you examine a long tube that has been printed and output, you will see notches between each segment. These notches allow you to break the individual tube segments apart by hand. The same is true for label tape. The
  • Canon MK 2600 | Mk2600 Users Guide - Page 120
    ex. Turn off half cuts and print a dotted cutting line. 1 Press [Set Cut]. • The Set Cut display appears. 2 Press [▲] or [▼] to select "Half cut" and then press [Enter]. • The Half Cut display appears. 3 Press [▲] or [▼] to select "Off" and then press [Enter]. • The Cut Line display appears.
  • Canon MK 2600 | Mk2600 Users Guide - Page 121
    input and the number of tube segments to be printed is set as "3", tube segments are produced as shown in Fig. 2. Fig. 1 Fig. 2 Initially, the printer is set to make one full cut after all tube segments are printed, but it is possible to change this setting so that a full cut
  • Canon MK 2600 | Mk2600 Users Guide - Page 122
    2". After pressing [Enter], use the feed function if the tube or label is not released from the transport roller (unable to remove) even after the printer has stopped. ("When a Tube or Label Tape is Not Ejected/Fed" ( page 128)) 3 Open the cover. 4 (Tube and plate only) Pull the tube or plate
  • Canon MK 2600 | Mk2600 Users Guide - Page 123
    or the media cassette from the printer. Advanced Operations Part 4 6 Close the cover. 7 Prepare to print. • See "Part 2 Basic Operation" for information on how to set the print media. Confirm that the ribbon is not slacked. Tighten the ribbon if the ribbon is slacked when removing the tube
  • Canon MK 2600 | Mk2600 Users Guide - Page 124
    Changing the display contrast The display can be difficult to see, depending on the ambient brightness and the viewing angle. If the display is difficult to see, adjust the display contrast. The display contrast can be set to any of nine levels. ex. Because the display is faint, increase the display
  • Canon MK 2600 | Mk2600 Users Guide - Page 125
    Advanced Operations Part 4 Turning off sounds Follow the procedure described below to turn off sounds such as the warning sound and the key touch sound for operations other than character input. 1 Press [Func]. • The Settings display appears. 2 Press [▲] or [▼] to select "Sound", and then press [
  • Canon MK 2600 | Mk2600 Users Guide - Page 126
    Restoring the initial settings It is possible to restore all settings to their initial values. 1 Hold down [Del All] while turning the power switch on. • The initialization confirmation display appears. 2 Press [◄] or [►] to select "Yes" and then press [Enter]. • After the screen shown at right
  • Canon MK 2600 | Mk2600 Users Guide - Page 127
    cutting speed 132 5.3 Replacing the Cutter.......... 133 5.4 Replacing the Cassette...... 136 Replacing the ribbon cassette 136 Replacing a tube or the label tape cassette 137 5.5 Maintenance 138 Cleaning the printer 138 Cleaning the transport rollers 138 Cleaning the print head 140 Cleaning
  • Canon MK 2600 | Mk2600 Users Guide - Page 128
    not displayed or it has disappeared because you have turned off the printer, take an appropriate action according to "Actions to Take against Other Remove the ribbon cassette from the printer. If the ribbon winds itself around some parts inside the printer and therefore the ribbon cassette cannot
  • Canon MK 2600 | Mk2600 Users Guide - Page 129
    or [◄] key, the tube is continuously fed reverse or forward. If the ribbon cassette could not be removed in step 4 or the label tape could not be removed for printing (Part 2 "Basic Operations"). Open the cover, load the removed ribbon cassette, tube, or label tape, and then close the cover. Press the
  • Canon MK 2600 | Mk2600 Users Guide - Page 130
    Canc] key until a "peep" sound is heard. If the printer is not powered, turn it on. 2 Open the cover. 3 Remove the ribbon cassette from the printer. If the ribbon winds itself around some parts inside the printer and therefore the ribbon cassette cannot be removed, proceed to step 4 without removing
  • Canon MK 2600 | Mk2600 Users Guide - Page 131
    key, the printing media is continuously fed reverse or forward. If the ribbon cassette could not be removed in step 3 or the label tape could not be (Part 2 "Basic Operations"). Open the cover, load the previously removed ribbon cassette, tube, or label tape, and then close the cover. Press
  • Canon MK 2600 | Mk2600 Users Guide - Page 132
    of the ribbon cassette around other parts, causing a jam. For example, use the Feed function in the following cases: • Printing media is not released from the feed roller even when you press the [Remove] key to replace the printing media. • The printer is operating but printing media is not ejected
  • Canon MK 2600 | Mk2600 Users Guide - Page 133
    the label tape enters the cassette. Refer to Note, "What to do if the label tape becomes stuck inside the cassette" ( page 38). Check the ribbon for slack. The ribbon of the ribbon cassette can slacken when it is fed reverse. Open the cover and check whether the
  • Canon MK 2600 | Mk2600 Users Guide - Page 134
    5.2 What To Do If the Cutter Is Getting Blunt Changing the cutting depth If the cutter does not cut tube or label tape properly, try changing the cutting depth. The cutting depth for half cuts and for full cuts can be adjusted as described below. In addition, these adjustments can be made separately
  • Canon MK 2600 | Mk2600 Users Guide - Page 135
    4 Press [▲] or [▼] to select "Depth", and then press [Enter]. • The Full Cut Depth display appears. 5 Press [▲] once, so that "Deep 1" appears. • Each time [▲] is pressed, the cutting depth increases by one. When adjusting the depth for a half cut, pressing [▼] reduces the depth. 6 Press [Enter]. •
  • Canon MK 2600 | Mk2600 Users Guide - Page 136
    Reducing the cutting speed If cutting is not performed smoothly for certain types of tube or label tape, try reducing the cutting speed. The cutting speed can be adjusted to one of two levels ("Normal" and "Low") for half cuts and for full cuts, respectively. This adjustment can also be made
  • Canon MK 2600 | Mk2600 Users Guide - Page 137
    expose the blade, creating a risk of injury. Do not attempt any operation that is not described in this manual. Furthermore, be sure to carefully follow the procedures described in this manual. Dispose of the old cutter immediately Do not keep the old cutter after you have replaced it; dispose of
  • Canon MK 2600 | Mk2600 Users Guide - Page 138
    4 Install the new cutter. • To ensure correct orientation, align the "-" mark on the cutter with the "◄" mark as shown, and insert the cutter all the way in. 5 Pull out the cutter receiver. 6 Insert the new cutter receiver. • Push the cutter receiver in as far as it will go. 7 Close the cover. Be
  • Canon MK 2600 | Mk2600 Users Guide - Page 139
    9 Press [Maint]. • The Maintenance display appears. 10 Press [▲] or [▼] to select "Replace cutter", and then press [Enter]. • After the display shown at right appears, the display returns to the character input display. The setting that was made in the section "Changing the cutting depth" ( page 130
  • Canon MK 2600 | Mk2600 Users Guide - Page 140
    of such items. 3 Take up any slack in the new ribbon. • Remove the stopper and then fix the slack in the ribbon. The printer cannot detect the ribbon if it has any slack in the ribbon. Always be sure to take up slack in the ribbon when installing a cassette. Dispose the removed stopper according to
  • Canon MK 2600 | Mk2600 Users Guide - Page 141
    . After pressing [Enter], use the feed function if the tube or label is not released from the transport roller (unable to remove) even after the printer has stopped. ("When a Tube or Label Tape is Not Ejected/Fed" ( page 128)) 2 Open the cover. 3 (Tube and plate only) Pull the tube or plate
  • Canon MK 2600 | Mk2600 Users Guide - Page 142
    5.5 Maintenance Cleaning the printer Wipe the body with a cloth that has been dampened with water and then wring out thoroughly. Do not use alcohol, benzene, or other solvents. Doing
  • Canon MK 2600 | Mk2600 Users Guide - Page 143
    4 Clean the transport rollers. 5 Close the cover. • The transport rollers rotate. Transport roller 3 release lever To clean transport rollers 2 or 3, first pull the transport roller 3 release lever to the right. Maintenance Part 5 Transport roller 1 Transport roller 2 Transport roller 3 6 Repeat
  • Canon MK 2600 | Mk2600 Users Guide - Page 144
    Cleaning the print head Use a cotton swab to clean dirt from the print head. Be very careful not to scratch the head. Also, always be sure to turn the power switch off before beginning to clean the print head. If the print head is extremely dirty, place a few drops of water on the cotton swab, and
  • Canon MK 2600 | Mk2600 Users Guide - Page 145
    supplies and options, the list of symbols, and the main specifications of the printer. 6.1 Consumable Supplies and Options 142 Consumable supplies 142 Options 143 6.2 Message List 144 6.3 Troubleshooting 147 6.4 List of Symbols 150 6.5 List of Function 151 6.6 Main Specifications 152
  • Canon MK 2600 | Mk2600 Users Guide - Page 146
    Options Consumable supplies The consumable supplies used by the printer are listed below. Contact your nearest dealer to purchase not be possible on some types of plate. Ask your supplier for details. Ink ribbon cassette (black, white) Purchase only special cassette. 4mm I.D. strip cassette (white)
  • Canon MK 2600 | Mk2600 Users Guide - Page 147
    low temperature environment. List of options Tube Warmer Tube Attachment Plate Attachment Wrap around tape guide List of consumable supplies Cassettes Ink ribbon cassette (black, white) Plate ink ribbon cassette (black) Label tape cassette (white) 6mm 9mm 12mm Label tape cassette (yellow) 6mm 9mm
  • Canon MK 2600 | Mk2600 Users Guide - Page 148
    . Check the User's Guide and make the correct setting. The character spacing cannot be selected when the printing orientation is set as "Vert/Hor char". Prepare data to be pasted by cutting or copying a page. Delete some input data to free up some space. Check the User's Manual and make the correct
  • Canon MK 2600 | Mk2600 Users Guide - Page 149
    three lines. Input character data before printing. Load the print media and then press [Enter] to begin printing. Install a ribbon cassette. Take out the printing media from the printer, and replace it with new printing media. Insert the new printing media and then press [Enter] to resume printing
  • Canon MK 2600 | Mk2600 Users Guide - Page 150
    ribbon is low when printing. (approximately 10m remaining) The printer could not properly communicate with the ribbon cassette. Or, the end of the ribbon object. Have a new ribbon cassette ready. Replace with new ribbon cassette if printing a long document. Follow the instruction on the screen. Only
  • Canon MK 2600 | Mk2600 Users Guide - Page 151
    Troubleshooting Appendices Part 6 Symptoms The display remains blank when the power is turned on. The startup display remains on the display; the input display does not appear. The printer the printer. The printing start position and the printing vertical position are not set correctly. The ribbon
  • Canon MK 2600 | Mk2600 Users Guide - Page 152
    be made Cause When transporting the tube, the edge of it touched the ribbon cassette and smeared. The load placed on the tube when supplying the tube unsuitable for the printer. The print media is jammed. The tube is transported to the printer twisted. A wrap-around tape guide for wrap-around
  • Canon MK 2600 | Mk2600 Users Guide - Page 153
    Appendices Part 6 Torn ribbon The tube is stained with sticky matter similar to the glue. Use a clean tube. Cannot select printing media other than the plate. There is a page
  • Canon MK 2600 | Mk2600 Users Guide - Page 154
    6.4 List of Symbols 150
  • Canon MK 2600 | Mk2600 Users Guide - Page 155
    6.5 List of Function Appendices Part 6 Clear tube reverse *About the Printing Performed with the Segment Length Specified The following table summarizes the specifications to conform to when printing characters with "Normal" specified on the Plate Printing Area selection display and a value less
  • Canon MK 2600 | Mk2600 Users Guide - Page 156
    = Half cutting, Cutting strength: Normal) Ink ribbon Special cassette (black, white) Character print size supply Custom AC adapter (N14584) CANON FINETECH NISCA INC. Input voltage condensation) * With the optional Tube Warmer installed, the printer can also be used at lower temperatures (5°C to 18
  • Canon MK 2600 | Mk2600 Users Guide - Page 157
  • Canon MK 2600 | Mk2600 Users Guide - Page 158
    PUB. 4Y5-8715-030 ©CANON FINETECH NISCA INC. 2017
  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
  • 122
  • 123
  • 124
  • 125
  • 126
  • 127
  • 128
  • 129
  • 130
  • 131
  • 132
  • 133
  • 134
  • 135
  • 136
  • 137
  • 138
  • 139
  • 140
  • 141
  • 142
  • 143
  • 144
  • 145
  • 146
  • 147
  • 148
  • 149
  • 150
  • 151
  • 152
  • 153
  • 154
  • 155
  • 156
  • 157
  • 158
User’s Guide
Please read this guide before operating this product.
After you finish reading this guide, store it in a safe place for future reference.