Canon MK 2600 Mk2600 Users Guide - Page 99
Press [Print]., Press, to select Tube, and then press [Enter]., to select Sets to print
View all Canon MK 2600 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 99 highlights
Advanced Operations Part 4 ex. Create the character data shown below and then use that data to produce tube segments as shown in the example below by printing the character data from pages 2 to 4 as follows. 1 Press [Print]. • The Print Media selection display appears. 2 Press [▲] or [▼] to select "Tube", and then press [Enter]. • The Tube size selection display appears. 3 Press [▲] or [▼] to select "Ф3mm", and then press [Enter]. • The Sets to print and Range setting display appears. A check mark is displayed next to the currently selected print media. A check mark is displayed next to the currently selected tube size. 4 Press [▲] or [▼] to select "Sets to print", and then press [3]. If you input the wrong number by mistake, press [Back Space] to delete the number and then input the correct number. 95