Canon MK 2600 Mk2600 Users Guide - Page 104
Press [Seg Len]., The Plate Printing Area selection display appears.
View all Canon MK 2600 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 104 highlights
ex. Print the following character data with 50 mm specified as the segment length, "Normal" for the plate printing area, "Left" for character alignment, and 5 mm as the margin. 1 Press [Seg Len]. • The segment length selection display appears. When the specified segment length is shorter than 8.5 mm, the printer specifications change depending on the media type. Refer to "List of Function" ( page 151). 2 Press [▲] or [▼] to select "Specify", and then input "50" (the segment length). If you accidentally input an incorrect number, press [Back Space] to delete the number and then input the correct one. To change the segment length of all pages after entering characters, press [◄] or [►] to select "All". Some segment length cannot be specified depending on the character size. 3 Press [Enter]. • The Plate Printing Area selection display appears. Confirm that "Page" is selected. segment length range that can be specified 4 Press [▲] or [▼] to select "Standard", and then press [Enter]. • The character alignment selection display appears. 5 Press [▲] or [▼] to select "Left", and then input "5" (the margin). If you accidentally input an incorrect number, press [Back Space] to delete the number and then input the correct one. If "Normal" is selected on the Plate Printing Area selection display, you can specify the left-justification margin between 2 mm and 5 mm. If you select "Expansion," you cannot specify the left-justification margin. It is fixed at 0 mm. If "Expansion" is selected on the Plate Printing Area selection display, only plates can be used as the printing media. Press [Enter]. • The display returns to the character input display. 100