Canon MK 2600 Mk2600 Users Guide - Page 34

Prep2 Insert tube, Open the cover., Insert a tube.

Get Canon MK 2600 PDF manuals and user guides View all Canon MK 2600 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 34 highlights

Insert tube Tube is not provided with the printer; it must be purchased separately. The printer can print on tube with a diameter ranging from 2.5mm to 6.5mm. Note that the printer will not print properly on tube that is bumpy, dirty, or of uneven thickness. 1 Open the cover. 2 Insert a tube. • Insert the tube into the intake, and push the tube in until it touches the transport roller 2. Transport roller 2 3 Close the cover. • Close the cover completely so that it clicks shut. Pay attention to warp of the tube. Insert the tube with the warp oriented as shown in the figure. If the tube is inserted in a wrong orientation, it can jam and cause a feed error. CAUTION When tube presence cannot be detected Depending on the type of tube, this machine may be unable to detect whether the tube is present. In such cases, use the clear tube mode for printing. However, in the clear tube mode, the machine cannot detect when the tube supply has run out. When the tube supply has run out, hold down [Canc] until the printer beeps. When using a tube reel Adjust the tube reel so that the load does not exceed 4.9N (500gf). If the load is too great, the tube will stretch and the cutting position will shift. 30

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
  • 122
  • 123
  • 124
  • 125
  • 126
  • 127
  • 128
  • 129
  • 130
  • 131
  • 132
  • 133
  • 134
  • 135
  • 136
  • 137
  • 138
  • 139
  • 140
  • 141
  • 142
  • 143
  • 144
  • 145
  • 146
  • 147
  • 148
  • 149
  • 150
  • 151
  • 152
  • 153
  • 154
  • 155
  • 156
  • 157
  • 158
30
Insert tube
Tube is not provided with the printer; it must be purchased separately. The printer can print on tube with a
diameter ranging from 2.5mm to 6.5mm. Note that the printer will not print properly on tube that is bumpy,
dirty, or of uneven thickness.
1
Open the cover.
2
Insert a tube.
•
Insert the tube into the intake, and push the tube
in until it touches the transport roller 2.
Transport roller 2
3
Close the cover.
•
Close the cover completely so that it clicks shut.
Pay attention to warp of the tube.
Insert the tube with the warp oriented as shown in the
figure. If the tube is inserted in a wrong orientation, it
can jam and cause a feed error.
CAUTION
When tube presence cannot be detected
Depending on the type of tube, this machine may be unable to detect whether the tube is
present. In such cases, use the clear tube mode for printing. However, in the clear tube
mode, the machine cannot detect when the tube supply has run out.
When the tube supply has run out, hold down [Canc] until the printer beeps.
When using a tube reel
Adjust the tube reel so that the load does not exceed
4.9N (500gf). If the load is too great, the tube will
stretch and the cutting position will shift.