Canon MK 2600 Mk2600 Users Guide - Page 136
Reducing the cutting speed, The Full Cut display appears.
View all Canon MK 2600 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 136 highlights
Reducing the cutting speed If cutting is not performed smoothly for certain types of tube or label tape, try reducing the cutting speed. The cutting speed can be adjusted to one of two levels ("Normal" and "Low") for half cuts and for full cuts, respectively. This adjustment can also be made separately for different types of print media. ex. Full cutting does not work well, so reduce the cutting speed. 1 Press [Adjust]. • The Print Media display appears. 2 Press [▲] or [▼] to select "Tube", and then press [Enter]. • Select the type of print media for which the adjustment is to be made. • Press [Enter] to display the Adjustments display. The cutting speed can be set separately for different types of printing media. 3 Press [▲] or [▼] to select "Full cut", and then press [Enter]. • The Full Cut display appears. 4 Press [▲] or [▼] to select "Speed", and then press [Enter]. • The cutting speed adjustment display appears. 5 Press [▲] or [▼] to select "Low". Indicates that the cutting speed is set to the normal setting. 6 Press [Enter]. • The display returns to the character input display. The cutting speed has now been reduced. 132