Canon MK 2600 Mk2600 Users Guide - Page 54

Prep2 Insert plate, Open the cover., Insert a plate.

Get Canon MK 2600 PDF manuals and user guides View all Canon MK 2600 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 54 highlights

Insert plate Plates are not provided with the printer; they must be purchased separately. The printer can print on from 8.0mm to 10mm plates. Note that the printer will not print properly on plates that are bumpy, dirty or of uneven thickness. 1 Open the cover. 2 Insert a plate. • Insert the plate into the intake, and push it in until it touches the transport roller 2. Transport roller 2 3 Close the cover. • Close the cover completely so that it clicks shut. Printing may not be performed properly if the surface of the plate is unsuitable. Pay attention to warp of the plate. Insert the plate with the warp oriented as shown in the figure. If the plate is inserted in a wrong orientation, it can jam and cause a feed error. 50

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
  • 122
  • 123
  • 124
  • 125
  • 126
  • 127
  • 128
  • 129
  • 130
  • 131
  • 132
  • 133
  • 134
  • 135
  • 136
  • 137
  • 138
  • 139
  • 140
  • 141
  • 142
  • 143
  • 144
  • 145
  • 146
  • 147
  • 148
  • 149
  • 150
  • 151
  • 152
  • 153
  • 154
  • 155
  • 156
  • 157
  • 158
50
Insert plate
Plates are not provided with the printer; they must be purchased separately. The printer can print on from 8.0mm
to 10mm plates. Note that the printer will not print properly on plates that are bumpy, dirty or of uneven
thickness.
1
Open the cover.
2
Insert a plate.
•
Insert the plate into the intake, and push it in
until it touches the transport roller 2.
3
Close the cover.
•
Close the cover completely so that it clicks shut.
Printing may not be performed properly if the surface of the plate
is unsuitable.
Pay attention to warp of the plate.
Insert the plate with the warp oriented as shown in the
figure. If the plate is inserted in a wrong orientation, it
can jam and cause a feed error.
Transport roller 2