Canon MK 2600 Mk2600 Users Guide - Page 118

Changing the printing speed, Press [Func]., Press, to select Print speed, and then press, Enter].

Get Canon MK 2600 PDF manuals and user guides View all Canon MK 2600 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 118 highlights

Changing the printing speed It is possible to change the printing speed. However, if the printing speed is too fast for the environment in which the printer is used and the characteristics of the print media, printing may shift out of position or be otherwise affected. The print speed can be set to one of three levels: "Low*", "Middle*" or "High*". *When "Low" is selected, characters can be printed on 30 tube segments/min. When "Middle" is selected, characters can be printed on 35 tube segments/min. When "High" is selected, characters can be printed on 30 tube segments/min. (The segment length is 20 mm, five "3mm 100%" characters are entered, and each tube is cut into two segments. This feature is available only for printing on tube.) If the characters printed at a temperature below 20°C with "High" selected on the Print speed selection display are faint, select a lower printing speed. ex. Set the print speed to "Low". 1 Press [Func]. • The Settings display appears. 2 Press [▲] or [▼] to select "Print speed", and then press [Enter]. • The Print speed selection display appears. 3 Press [▲] or [▼] to select "Low", and then press [Enter]. • The display returns to the character input display. The print speed has now been set to Low. If "L" is displayed, the print speed has been set to "Low". "M" and "H" are displayed for "Middle" and "High" respectively. Printing Speed You can select a printing speed from among low speed, middle speed, and high speed. The actual printing speed varies depending on the media type. mm/sec Printing media Printing speed Cut Not cut Tube Clear tube Low Middle 18.5 25 20 Heat-shrinkable tube 4 mml. D. strip Label Wraparound tape Plate High Low Middle High Low Middle High 40 25 20 40 Cannot 18.5 be cut. 40 114

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
  • 122
  • 123
  • 124
  • 125
  • 126
  • 127
  • 128
  • 129
  • 130
  • 131
  • 132
  • 133
  • 134
  • 135
  • 136
  • 137
  • 138
  • 139
  • 140
  • 141
  • 142
  • 143
  • 144
  • 145
  • 146
  • 147
  • 148
  • 149
  • 150
  • 151
  • 152
  • 153
  • 154
  • 155
  • 156
  • 157
  • 158
114
Changing the printing speed
It is possible to change the printing speed. However, if the printing speed is too fast for the environment in
which the printer is used and the characteristics of the print media, printing may shift out of position or be
otherwise affected. The print speed can be set to one of three levels: “Low*”, “Middle*” or “High*”.
*When “Low” is selected, characters can be printed on 30 tube segments/min. When “Middle” is selected, characters can be printed on 35 tube
segments/min. When “High” is selected, characters can be printed on 30 tube segments/min. (The segment length is 20 mm, five “3mm 100%”
characters are entered, and each tube is cut into two segments. This feature is available only for printing on tube.)
If the characters printed at a temperature below 20°C with “High” selected on the Print
speed selection display are faint, select a lower printing speed.
ex. Set the print speed to “Low”.
1
Press [Func].
•
The Settings display appears.
2
Press [
▲
] or [
▼
] to select “Print speed”, and then press
[Enter].
•
The Print speed selection display appears.
3
Press [
▲
] or [
▼
] to select “Low”, and then press [Enter].
•
The display returns to the character input display. The print
speed has now been set to Low.
If “L” is displayed, the print speed has been
set to “Low”. “M” and “H” are displayed for
“Middle” and “High” respectively.
Printing Speed
You can select a printing speed from among low speed, middle speed, and high speed. The
actual printing speed varies depending on the media type.
mm/sec
Printing media
Printing speed
Cut
Not cut
Tube
Clear tube
Low
18.5
Middle
25
20
High
40
Heat-shrinkable tube
4 mml. D. strip
Label
Wraparound tape
Low
Middle
25
20
High
40
Plate
Low
Middle
Cannot
be cut.
18.5
High
40