Canon MK 2600 Mk2600 Users Guide - Page 135
Press [Maint]., The Full Cut Depth display appears.
View all Canon MK 2600 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 135 highlights
4 Press [▲] or [▼] to select "Depth", and then press [Enter]. • The Full Cut Depth display appears. 5 Press [▲] once, so that "Deep 1" appears. • Each time [▲] is pressed, the cutting depth increases by one. When adjusting the depth for a half cut, pressing [▼] reduces the depth. 6 Press [Enter]. • The display returns to the character input display. The cutting depth is now one step deeper. Maintenance Part 5 Indicates that the cutting depth is at the standard setting. Confirm that the cutting depth is "Deep 1". What to do if the cutter still does not cut well (Force full cut) If the cutter will not cut well no matter how much you adjust the cutting depth, try using "Force full cut". When force full cut is performed, the cutter cuts to the deepest depth possible. If the cutter still does not cut even when using force full cut, the cutter needs to be replaced. For details on the replacement procedure, refer to "Replacing the cutter" ( page 133). 1. Press [Maint]. • The Maintenance display appears. 2. Press [▲] or [▼] to select "Force full cut", and then press [Enter]. • The full cut confirmation display appears. 3. Press [◄] or [►] to select "Yes", and then press [Enter]. • A full cut is made. 131