Canon MK 2600 Mk2600 Users Guide - Page 112

Adjusting the printing start position and vertical position, Case 1

Get Canon MK 2600 PDF manuals and user guides View all Canon MK 2600 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 112 highlights

Adjusting the printing start position and vertical position When printing, enviromental factors or characteristics of the print media may cause printing to start slightly out of position or to be shifted slightly in the vertical direction so that character data is not printed correctly, even though the correct print media type and size are selected. In such cases, you can shift the printing position slightly up/down or left/right. The printing start position can be set independently for each print media. Case 1 The character alignment is set to "Left" and the margin was set to "3mm". However, when actually printed, the margin is only 2mm. Case 2 Printing is shifted up about 0.5mm. ex. When printing on label tape (12mm wide), the phenomena described in case 1 and case 2 both occur simultaneously. Make the appropriate adjustments. 1 Press [Adjust]. • The Print Media selection display appears. First, shift the printing start position 1mm to the right. 2 Press [▲] or [▼] to select "Label", and then press [Enter]. • This selects the print media for which the adjustment is to be made. • When [Enter] is pressed, the Adjustments display appears. 3 Press [▲] or [▼] to select "Lead adjust", and then press [Enter]. • The Lead adjust selection display appears. Indicates that the printing start position is at the normal setting (with no adjustment). 108

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
  • 122
  • 123
  • 124
  • 125
  • 126
  • 127
  • 128
  • 129
  • 130
  • 131
  • 132
  • 133
  • 134
  • 135
  • 136
  • 137
  • 138
  • 139
  • 140
  • 141
  • 142
  • 143
  • 144
  • 145
  • 146
  • 147
  • 148
  • 149
  • 150
  • 151
  • 152
  • 153
  • 154
  • 155
  • 156
  • 157
  • 158
108
Adjusting the printing start position and vertical position
When printing, enviromental factors or characteristics of the print media may cause printing to start slightly
out of position or to be shifted slightly in the vertical direction so that character data is not printed correctly,
even though the correct print media type and size are selected. In such cases, you can shift the printing position
slightly up/down or left/right.
The printing start position can be set independently for each print media.
Case 1
The character alignment is set to “Left” and the margin was set to “3mm”. However, when actually printed, the
margin is only 2mm.
Case 2
Printing is shifted up about 0.5mm.
ex. When printing on label tape (12mm wide), the phenomena described in case 1 and case 2
both occur simultaneously. Make the appropriate adjustments.
1
Press [Adjust].
•
The Print Media selection display appears. First, shift the
printing start position 1mm to the right.
2
Press [
▲
] or [
▼
] to select “Label”, and then press [Enter].
•
This selects the print media for which the adjustment is to be
made.
•
When [Enter] is pressed, the Adjustments display appears.
3
Press [
▲
] or [
▼
] to select “Lead adjust”, and then press
[Enter].
•
The Lead adjust selection display appears.
Indicates that the printing start position
is at the normal setting (with no
adjustment).