Canon MK 2600 Mk2600 Users Guide - Page 155
List of Function
View all Canon MK 2600 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 155 highlights
6.5 List of Function Appendices Part 6 Clear tube reverse *About the Printing Performed with the Segment Length Specified The following table summarizes the specifications to conform to when printing characters with "Normal" specified on the Plate Printing Area selection display and a value less than 8.5 mm specified on the Seg Length selection display: Media Plate Label Tube 4mm I.D. Strip Clear tube Heat shrink tube Wrap around tape Specifications applied when the segment length is specified to a value less than 8.5 mm A segment length can be specified, but only [Centered] can be specified as the character alignment. A segment length can be specified, but only [Centered] can be specified as the character alignment. * Characters may not be centered when "Half Cut" is set to "On". When the label is half cut with the segment length of 3.5mm or less, consider the following: • Use the 9mm/12mm-width label. • Cut depth adjustment is required. ( page 130) If you specify a segment length, it is automatically changed to "Automatic" to maintain the print quality during actual printing. (The left and right margin become 2.0 mm or wider respectively.) 151