Canon MK 2600 Mk2600 Users Guide - Page 131
Cut out the bent or damaged portion of the jammed printing, key or forward
View all Canon MK 2600 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 131 highlights
Maintenance Part 5 7 Select "Feed" by pressing the [▲] or [▼] key, and then press the [Enter] key. • A display indicating how to feed the printing media forward or reverse appears. 8 Pull out the printing media while pressing the [►] key continuously to feed the tube reverse. If you cannot pull out the printing media by feeding the tube reverse, press the [◄] key to feed the tube forward. • While you keep pressing the [►] or [◄] key, the printing media is continuously fed reverse or forward. If the ribbon cassette could not be removed in step 3 or the label tape could not be removed in step 4, open the cover and check whether the ribbon cassette or label tape can be removed. If the ribbon cassette or label tape can be removed, remove it and close the cover. If ribbon cassette or label tape cannot be removed, close the cover and keep pressing the [►] or [◄] key to check again whether the ribbon cassette or label tape can be removed. Open/close the cover and keep pressing the [►] or [◄] key repeatedly until the ribbon cassette or label tape can be removed. 9 Feed the tube reverse (by pressing the [►] key) or forward (by pressing the [◄] key) repeatedly to pull out the printing media completely. 10 Cut out the bent or damaged portion of the jammed printing media or the printed portion of the printing media if it exists. • Thus, the printing media removal procedure is completed. 11 Make preparations for printing (Part 2 "Basic Operations"). Open the cover, load the previously removed ribbon cassette, tube, or label tape, and then close the cover. Press the [Canc] key to return to the character input display. 127