Canon REALiS LCOS SX80 Mark II D Multimedia Projector SX80 MarkII/SX800 Users
Canon REALiS LCOS SX80 Mark II D Manual
View all Canon REALiS LCOS SX80 Mark II D manuals
Add to My Manuals
Save this manual to your list of manuals |
Canon REALiS LCOS SX80 Mark II D manual content summary:
- Canon REALiS LCOS SX80 Mark II D | Multimedia Projector SX80 MarkII/SX800 Users - Page 1
MULTIMEDIA PROJECTOR User's Manual Table of Contents Safety Instructions Before Use Projecting an Image Useful Functions Available During a Presentation Setting Up Functions from Menus Projecting an Image from a Digital Camera or an USB Flash - Canon REALiS LCOS SX80 Mark II D | Multimedia Projector SX80 MarkII/SX800 Users - Page 2
Features of SX80 MarkII/SX800 Multimedia Projector Thank you for purchasing a Canon projector. The SX80 MarkII/SX800 Multimedia Projector (hereinafter referred to as "the projector") is a high-performance projector that is capable of projecting high-resolution computer screens, high-quality digital - Canon REALiS LCOS SX80 Mark II D | Multimedia Projector SX80 MarkII/SX800 Users - Page 3
Features of SX80 MarkII/SX800 Multimedia Projector Various Image Modes for a Particular Use of Your Projector (SX80 II) When projecting a digital still photo image or an image that has been processed on an sRGB-compatible monitor, you can project the image with higher tone on the screen by - Canon REALiS LCOS SX80 Mark II D | Multimedia Projector SX80 MarkII/SX800 Users - Page 4
for the SX80 MarkII/SX800 Multimedia Projector. This manual provides detailed information on how to use the projector. Read this manual thoroughly to make the most of your projector and ensure safety. Important Information and Quick Start Guide First read document. It provides information about - Canon REALiS LCOS SX80 Mark II D | Multimedia Projector SX80 MarkII/SX800 Users - Page 5
Quick Reference Guide This Quick Reference Guide will help you find functions that make full use of the projector, Cord (P104) Disabling the Beep During the Operation (P104) Disabling Buttons (P105) Hiding Guide Messages (P106) Turning Off the Projector LED Lamps (P106) Setting a Password (P108) 5 - Canon REALiS LCOS SX80 Mark II D | Multimedia Projector SX80 MarkII/SX800 Users - Page 6
Table of Contents Features of SX80 MarkII/SX800 Multimedia Projector 2 Quick Reference Guide 5 Safety Instructions...12 Safety Precautions ...13 ■ READ AND KEEP THIS OWNER'S MANUAL FOR LATER USE 14 AC Power Cord Requirement 16 Federal Communication Commission Notice 17 Canadian Radio - Canon REALiS LCOS SX80 Mark II D | Multimedia Projector SX80 MarkII/SX800 Users - Page 7
57 Adjusting the Image Size ...58 Adjusting the Focus ...59 ■ Auto focusing (SX80 II)...59 ■ Manual focusing ...59 Adjusting Keystone Distortion 60 ■ Auto adjustment...60 ■ Manual adjustment ...60 ■ Resetting the Keystone Adjustment 61 Selecting Screen Aspect and Aspect 62 Selecting Screen Aspect - Canon REALiS LCOS SX80 Mark II D | Multimedia Projector SX80 MarkII/SX800 Users - Page 8
Table of Contents Muting the Sound ...71 Zooming an Image ...72 Showing the Elapsed Time...73 Projecting Image Without Computer (SX80 II 73 Setting Functions from Menus 75 How to Use Menus ...76 ■ Menu Configuration...76 ■ Basic Operation of Menu 77 Setting Display Status 79 Selecting an Image - Canon REALiS LCOS SX80 Mark II D | Multimedia Projector SX80 MarkII/SX800 Users - Page 9
POWER Button Operation 104 Enabling/Disabling the Beep 104 Prohibiting the Projector Operation 105 Selecting a Display Language 105 Showing/hiding the Guide Screen 106 Turning on/off LED Illumination 106 Setting for Slideshow (SX80 II 107 Setting up the Remote Control Channel 107 Extending - Canon REALiS LCOS SX80 Mark II D | Multimedia Projector SX80 MarkII/SX800 Users - Page 10
Screen 128 ■ Setting the Network...129 ■ Resetting the Network Setting 134 ■ Error Notification Message 135 ■ Projector Control ...136 Appendix ...137 Troubleshooting...138 WARNING Lamp Flash Patterns 138 Symptoms and Solutions...139 ■ You cannot turn on the projector 139 ■ You cannot project - Canon REALiS LCOS SX80 Mark II D | Multimedia Projector SX80 MarkII/SX800 Users - Page 11
of Contents Supported Computer Signal Types 150 Relationship between Screen Size and Projecting Distance 151 Glossary ...152 Specifications ...156 ■ Projector ...156 ■ Remote Control...156 ■ External View ...157 ■ ANALOG PC-1 (SX800), ANALOG PC-2/COMPONENT IN terminal 157 ■ Service Port (CONTROL - Canon REALiS LCOS SX80 Mark II D | Multimedia Projector SX80 MarkII/SX800 Users - Page 12
. If your projector is not operating correctly, read this manual again, check operations and cable connections, and try the solutions shown in the "Troubleshooting" section at the end of this booklet. If the problem still persists, contact the service center or the dealer where you purchased the - Canon REALiS LCOS SX80 Mark II D | Multimedia Projector SX80 MarkII/SX800 Users - Page 13
Safety Instructions Safety Instructions Safety Precautions WARNING: TO REDUCE THE RISK OF distances must be maintained. Do not cover the ventilation slot on the projector. Heat build-up can reduce the service life of your projector, and can also be dangerous. SIDE and TOP REAR 1 m (3.3') 1 m - Canon REALiS LCOS SX80 Mark II D | Multimedia Projector SX80 MarkII/SX800 Users - Page 14
■READ AND KEEP THIS OWNER'S MANUAL FOR LATER USE. All the safety and operating instructions should be read before beginning to operate the product. Read all of the instructions given here and retain them for later use. Unplug this projector from the AC power supply before cleaning. Do not - Canon REALiS LCOS SX80 Mark II D | Multimedia Projector SX80 MarkII/SX800 Users - Page 15
service personnel under the following conditions: a. When the power cord or plug is damaged or frayed. b. If liquid has been spilled into the projector. c. If the projector has been exposed to rain or water. d. If the projector does not operate normally after following the operating instructions - Canon REALiS LCOS SX80 Mark II D | Multimedia Projector SX80 MarkII/SX800 Users - Page 16
Safety Instructions AC Power Cord Requirement The AC Power Cord supplied with this projector meets the contact your local city office, waste authority, approved scheme or your household waste disposal service or visit www.canon-europe.com/environment. (EEA: Norway, Iceland and Liechtenstein) 16 - Canon REALiS LCOS SX80 Mark II D | Multimedia Projector SX80 MarkII/SX800 Users - Page 17
B limits in Subpart B of Part 15 of FCC Rules. Do not make any changes or modifications to the equipment unless otherwise specified in the instructions. If such changes or modifications should be made, you could be required to stop operation of the equipment. Canon U.S.A. Inc. One Canon Plaza, Lake - Canon REALiS LCOS SX80 Mark II D | Multimedia Projector SX80 MarkII/SX800 Users - Page 18
Safety Instructions Precautions on Handling the Batteries in the Remote Controller Caution immediately. • If a lamp explodes, its shards may scatter inside the projector. Ask the Canon service representative to clean and check the inside of the projector and replace the lamp. Caution If the - Canon REALiS LCOS SX80 Mark II D | Multimedia Projector SX80 MarkII/SX800 Users - Page 19
Safety Instructions Safety Instructions Disposal of Waste Lamp • Dispose of the projector's mercury may be damaged or malfunctioned. • Do not transport the projector through a courier or transport service with the carrying bag. Put the projector in an impact-resistant transport case if such is - Canon REALiS LCOS SX80 Mark II D | Multimedia Projector SX80 MarkII/SX800 Users - Page 20
Safety Instructions Caution Position the projector in a horizontal position. Incorrect installation may cause troubles and accidents. • Do not tilt the projector more than 20 degrees above and below the horizontal. • When you want to use your projector point- 20° - Canon REALiS LCOS SX80 Mark II D | Multimedia Projector SX80 MarkII/SX800 Users - Page 21
Before Use Table of Contents Safety Instructions Before Use Projecting an Image Useful Functions Available During a Presentation Setting Up Functions from Menus Projecting an Image from a Digital Camera or an USB Flash - Canon REALiS LCOS SX80 Mark II D | Multimedia Projector SX80 MarkII/SX800 Users - Page 22
Europe YH7-2084 (SX800) YH7-2307 For the U.S.A and Canada z Lens cap z Lens cap strap z Carrying bag z User's Manual (CD-ROM) z Warranty card z Important Information and Quick Start Guide ■Installing the Lens Cap As shown in the illustration on the right, put the lens cap strap through the - Canon REALiS LCOS SX80 Mark II D | Multimedia Projector SX80 MarkII/SX800 Users - Page 23
of the projector from dust or scratches, and is not designed to protect the projector from external shocks. z User's Manual (CD-ROM) z Important Information and Quick Start Guide Remote control and cables • Wait until the cooling fan stops before putting the projector in the carrying bag. Do not - Canon REALiS LCOS SX80 Mark II D | Multimedia Projector SX80 MarkII/SX800 Users - Page 24
Part Names Main Unit of Projector (SX80 MarkII is used in the following illustrations) ■Front Side Anti-theft lock hole An anti-theft wire cable available on the market can be connected. Caution Be sure to remove the lens cap during projection. Failure to do so will result in fire hazards or - Canon REALiS LCOS SX80 Mark II D | Multimedia Projector SX80 MarkII/SX800 Users - Page 25
Part Names ■Bottom Side Air filter (P144) Lens cap strap insertion hole (P22) Adjustable foot (P37) Screw holes for installation of ceiling-mount hanger (M4x5) (P157) Lamp cover (P146) Air intake vent Caution Do not block the air exhaust. Failure to do so will result in fire hazards or - Canon REALiS LCOS SX80 Mark II D | Multimedia Projector SX80 MarkII/SX800 Users - Page 26
< < Part Names Remote Control The projector can be operated using buttons on the remote control or the top control on the main unit. The remote control allows you to operate all functions of the projector. POWER button (P49, P68) Turns the projector on or off. ASPECT button (P66) Toggles between - Canon REALiS LCOS SX80 Mark II D | Multimedia Projector SX80 MarkII/SX800 Users - Page 27
Part Names Before Use < AUTO SET button (P53) Performs input signal setting, keystone distortion adjustment, focusing (SX80 II), and screen color correction (SX80 II) automatically. INPUT button (P55) Switches among input signals. AUTO PC button (P57) Adjusts tracking and so on automatically in - Canon REALiS LCOS SX80 Mark II D | Multimedia Projector SX80 MarkII/SX800 Users - Page 28
the volume. [>]: Increases the volume. Selects the upper, lower, left or WARNING lamp (P138) right item in the menu. Flashes red when a problem has been detected on the projector. AUTO PC button (P57) Adjusts tracking and so on automatical- ly in accordance with signal from a computer when - Canon REALiS LCOS SX80 Mark II D | Multimedia Projector SX80 MarkII/SX800 Users - Page 29
Input Terminals ■SX80 MarkII (1)-A (2) (3) Part Names (4) (5) (6) (7) ■ SX800 (8) (1)-B (9) (10) (11) (3) (10) Before Use (7) (8) (9) (1)-A ANALOG PC-1/DVI-I IN Input Terminal ( DVI-I IN) (SX80 II) (P40, P42) (1)-B ANALOG PC-1 Input Terminal ( IN) (SX800) (P40) Connects an - Canon REALiS LCOS SX80 Mark II D | Multimedia Projector SX80 MarkII/SX800 Users - Page 30
to output an audio to external AV equipment. It outputs the audio signal corresponding to the projected image signal. (10) Service port (CONTROL) Exclusively used by the service personnel (it is not used normally). (11) LAN port (SX80 II) (P126) Connects a LAN cable. Used to connect the projector - Canon REALiS LCOS SX80 Mark II D | Multimedia Projector SX80 MarkII/SX800 Users - Page 31
Preparing the Remote Control ■Installing Remote Control Batteries 1 Open the battery com- partment lid. Slide the lid with it pressed down. 2 Insert batteries. Insert new two AAA-size batteries in the compartment with the + and - poles positioned correctly. 3 Replace the compart- ment lid. - Canon REALiS LCOS SX80 Mark II D | Multimedia Projector SX80 MarkII/SX800 Users - Page 32
32 - Canon REALiS LCOS SX80 Mark II D | Multimedia Projector SX80 MarkII/SX800 Users - Page 33
Projecting an Image Table of Contents Safety Instructions Before Use Projecting an Image Useful Functions Available During a Presentation Setting Up Functions from Menus Projecting an Image from a Digital Camera or an USB Flash - Canon REALiS LCOS SX80 Mark II D | Multimedia Projector SX80 MarkII/SX800 Users - Page 34
P52) Image projected properly? Yes No For a notebook computer, turn on the monitor output (P51) and then go to Auto Setup. In SX800, manually adjust the focus. Projection is complete. Selecting an Input Signal (P54) Image projected properly? Yes Projection is complete. No Adjusting the Image (P56 - Canon REALiS LCOS SX80 Mark II D | Multimedia Projector SX80 MarkII/SX800 Users - Page 35
Setting Up the Projector ■Placing in Front of the Screen Place the projector in front of the screen. • Be sure to place the projector parallel to the screen to ensure distortion-free projections. • The screen must not be exposed to direct sunlight or light from lighting equipment. In a bright room, - Canon REALiS LCOS SX80 Mark II D | Multimedia Projector SX80 MarkII/SX800 Users - Page 36
as horizontal as possible. If you need to point the projector up (for example, when the screen is placed on a higher position), follow the instruction given in "When Pointing the Projector Up" on the following page. • Adjust the tilt of the projecting image using the rear adjustable foot. Make - Canon REALiS LCOS SX80 Mark II D | Multimedia Projector SX80 MarkII/SX800 Users - Page 37
Setting Up the Projector ■When Pointing the Projector Up When the screen is placed on a higher position, point the projector up using the adjustable foot. You can point it up as far as 10 degrees. The keystone distortion of the projecting image can be corrected with the auto keystone (P52) or by - Canon REALiS LCOS SX80 Mark II D | Multimedia Projector SX80 MarkII/SX800 Users - Page 38
. Digital video camera* (P44) HDMI IN terminal can be used to connect only AV equipment. AV equipment (P46) USB flash memory (P118) Service terminal (Reserved) S-VIDEO Video S-VIDEO IN terminal VIDEO IN terminal AUDIO IN terminal AV equipment (P45) AV equipment (P45) Audio signal for each - Canon REALiS LCOS SX80 Mark II D | Multimedia Projector SX80 MarkII/SX800 Users - Page 39
PC-1 terminal Computer (P40) ANALOG PC-2 COMPONENT ANALOG PC-2/ COMPONENT IN terminal Computer (P41) Connecting the Projector AV equipment (P46) Service terminal (Reserved) Projecting an Image Video VIDEO IN terminal AUDIO IN terminal AV equipment (P45) Audio signal for each image input - Canon REALiS LCOS SX80 Mark II D | Multimedia Projector SX80 MarkII/SX800 Users - Page 40
Connecting the Projector Connecting the Projector to the Computer Connect the projector to the computer. Before connecting the cables, turn off both the projector and computer. ■Connecting to RGB Monitor Output Terminal (analog connection) Supplied computer connection cable (Input signal type: [ - Canon REALiS LCOS SX80 Mark II D | Multimedia Projector SX80 MarkII/SX800 Users - Page 41
Projecting an Image Connecting the Projector Commercial or supplied VGA cable (Input signal type: [ANALOG PC-2] - P54) Computer Projector Monitor output terminal (mini D-sub 15-pin) Audio output terminal (AUDIO OUT) Monitor output terminal (mini D-sub 15-pin) Audio output terminal (AUDIO OUT) - Canon REALiS LCOS SX80 Mark II D | Multimedia Projector SX80 MarkII/SX800 Users - Page 42
Connecting the Projector ■Connecting to DVI Monitor Output Terminal (digital connection) (SX80 II) DVI cable (Input signal type: [DIGITAL PC] - P54) Computer Projector Monitor output terminal (DVI terminal) DVI digital cable (LV-CA29, option) To input a corresponding audio signal: To ANALOG PC - Canon REALiS LCOS SX80 Mark II D | Multimedia Projector SX80 MarkII/SX800 Users - Page 43
Connecting the Projector Outputting Audio to Speakers It is possible to output sound of projected images to AV equipment or amplified speakers. Projector Speaker To AUDIO OUT Commercial audio cable RCA terminal Mini jack Audio input terminal (AUDIO IN) • The speaker outputs the audio signal - Canon REALiS LCOS SX80 Mark II D | Multimedia Projector SX80 MarkII/SX800 Users - Page 44
, turn off both the projector and AV equipment. The description provided here is just examples. For more detailed information, refer to the manual for the connecting AV equipment. ■Connecting to Digital Video Output Terminal (digital connection) (SX80 II) HDMI cable (Input signal type: [HDMI] - P54 - Canon REALiS LCOS SX80 Mark II D | Multimedia Projector SX80 MarkII/SX800 Users - Page 45
terminal type of the AV equipment. The input signal type is [VIDEO] or [S-VIDEO]. Sound is common to [VIDEO] and [S-VIDEO]. [S-VIDEO] is supported only in SX80 MarkII. AV equipment Projector Projecting an Image S terminal Commercial S-VIDEO cable To S-VIDEO IN To AUDIO IN RCA terminal Image - Canon REALiS LCOS SX80 Mark II D | Multimedia Projector SX80 MarkII/SX800 Users - Page 46
Connecting the Projector Supplied component cable (Input signal type: [COMPONENT] - P54) A Component video signal from AV equipment can be input to the projector by connecting the supplied component cable to the ANALOG PC-2/COMPONENT IN terminal of the projector. Use a commercial component cable - Canon REALiS LCOS SX80 Mark II D | Multimedia Projector SX80 MarkII/SX800 Users - Page 47
Connecting the Projector ■Outputting Audio to Speakers It is possible to output sound of projected images to AV equipment or amplified speakers. Projector Speaker To AUDIO OUT Commercial audio cable RCA terminal Mini jack Audio input terminal (AUDIO IN) Use an audio cable without a built-in - Canon REALiS LCOS SX80 Mark II D | Multimedia Projector SX80 MarkII/SX800 Users - Page 48
Connecting the Projector ■Connecting a Digital Camera or an USB Flash Memory (SX80 II) SX80 MarkII supports PictBridge. You can connect a PictBridge enabled digital camera, a digital video camera, an USB flash memory, or an USB memory card reader to directly project images. - Canon REALiS LCOS SX80 Mark II D | Multimedia Projector SX80 MarkII/SX800 Users - Page 49
socket. • Connect the ground terminal on the power plug to ground. Otherwise, an electric shock may result or the computer may suffer electromagnetic radiation problems or be subject to poor reception by TV and radio. • Wait at least 5 minutes before turning on the projector when you turn off the - Canon REALiS LCOS SX80 Mark II D | Multimedia Projector SX80 MarkII/SX800 Users - Page 50
projector is projecting an image properly with [AUTO SETUP], the projection is complete. In SX800, adjust the focus and correct the screen color manually. For how to turn off the projector, refer to the page 68. Perform the appropriate opera- tion depending on the following situations. ■When - Canon REALiS LCOS SX80 Mark II D | Multimedia Projector SX80 MarkII/SX800 Users - Page 51
The function keys you use and the method used to turn on the external monitor output vary depending on the model. For details, see the instructions of your notebook computer. 51 - Canon REALiS LCOS SX80 Mark II D | Multimedia Projector SX80 MarkII/SX800 Users - Page 52
: P59, Correcting keystone distortion: P60 and Correcting the screen color: P86) • In SX800, the auto setup function does not adjust the focus. Please manually adjust the focus. (P59) • If you select [16:9 D. image shift] for [Screen aspect], [Auto setup] will be disabled and the following screen - Canon REALiS LCOS SX80 Mark II D | Multimedia Projector SX80 MarkII/SX800 Users - Page 53
Setting Up the Screen Automatically ■Performing the Auto Setup Press the AUTO SET button to perform the auto setup. Remote control Top control • After the auto setup is complete, the following window appears. Press the OK button. SX80 MarkII SX800 Projecting an Image 53 - Canon REALiS LCOS SX80 Mark II D | Multimedia Projector SX80 MarkII/SX800 Users - Page 54
last projection. ■Types of Input Signals The table below shows the relationship among input signals supported by the projector, input terminals and connection cables. S Input signal Supported model Input terminal Types of connection cables HDMI IN HDMI cable (commercial item) HDMI SX80 - Canon REALiS LCOS SX80 Mark II D | Multimedia Projector SX80 MarkII/SX800 Users - Page 55
Projecting an Image < Selecting an Input Signal (INPUT) ■Selecting an Input Signal 1 Press the INPUT button to pop up a window shown at the lower right. Remote control Top control SX80 MarkII SX800 The currently active input signal is marked with a circle and highlighted in orange. An input - Canon REALiS LCOS SX80 Mark II D | Multimedia Projector SX80 MarkII/SX800 Users - Page 56
Adjusting Image Setting the Display Resolution of the Computer Set the display resolution of the computer to "1400 x 1050 pixels" or a resolution closest to the output signal resolution of the computer based on the performance of the projector (resolution: 1400 x 1050 pixels). (P150) ■Windows - Canon REALiS LCOS SX80 Mark II D | Multimedia Projector SX80 MarkII/SX800 Users - Page 57
signal settings] select [Total dots], [Track- ing], [Horizontal position], [Vertical position], [Horizontal pixels] and [Vertical pixels] to make adjustments. (P81 - P84) • For the signal types supported by the projector, see the table on page 150. Projecting an Image 57 - Canon REALiS LCOS SX80 Mark II D | Multimedia Projector SX80 MarkII/SX800 Users - Page 58
Adjusting Image Adjusting the Image Size Use the ZOOM button to adjust the size of the projecting image. Change the projector installation position if your desired image is too large or too small to adjust it with the zoom function. (P35) 1 Press the ZOOM button to pop up a window shown at the - Canon REALiS LCOS SX80 Mark II D | Multimedia Projector SX80 MarkII/SX800 Users - Page 59
button, and then the AUTO SET button. If you select [16:9 D. image shift] for [Screen aspect], the auto focus function will be disabled. ■Manual focusing 1 Press the FOCUS button to pop up a window shown at the lower right. Remote control Top control Projecting an Image < 2 Press the pointer - Canon REALiS LCOS SX80 Mark II D | Multimedia Projector SX80 MarkII/SX800 Users - Page 60
- abled. Project the image at right angle to the screen. ■Auto adjustment Press the D.SHIFT/KEYSTONE button, and then the AUTO SET button. ■Manual adjustment 1 Press the D.SHIFT/KEYSTONE button to pop up a window shown at the lower right. Remote control Top control 2 Press the pointer buttons - Canon REALiS LCOS SX80 Mark II D | Multimedia Projector SX80 MarkII/SX800 Users - Page 61
Projecting an Image Adjusting Image 3 When the keystone distortion has been adjusted, press the OK button. ■Resetting the Keystone Adjustment Perform the following steps to reset the keystone adjustment. Press the D.SHIFT/KEYSTONE button twice to display the [Keystone reset] window. On the window, - Canon REALiS LCOS SX80 Mark II D | Multimedia Projector SX80 MarkII/SX800 Users - Page 62
Selecting Screen Aspect and Aspect Select an optimum aspect ratio of the projecting image (screen aspect) or an optimum screen mode (aspect) according to the aspect ratio of the screen, type of input image signal and so on for the projection making best use of the screen size. • [Screen aspect]: - Canon REALiS LCOS SX80 Mark II D | Multimedia Projector SX80 MarkII/SX800 Users - Page 63
Projecting an Image < < 4 Use [ ] / [ ] to select a screen aspect type. Remote control Top control Selecting Screen Aspect and Aspect 4:3 Select this when you use a screen with aspect ratio of 4:3. 16:9 Select this when you use a screen with aspect ratio of 16:9. 16:9 D. image shift Select - Canon REALiS LCOS SX80 Mark II D | Multimedia Projector SX80 MarkII/SX800 Users - Page 64
Selecting Screen Aspect and Aspect ■Moving Image with 16:9 D. Image Shift 1 Press the D.SHIFT/KEYSTONE button to pop up a window shown at the lower right. Remote control Top control < < < < 2 Use [ ] / [ ] to move the image. Remote control Top control [ ]: Moves up the image. [ ]: Moves - Canon REALiS LCOS SX80 Mark II D | Multimedia Projector SX80 MarkII/SX800 Users - Page 65
Projecting an Image Selecting Screen Aspect and Aspect Selecting Aspect Ratio Select the aspect ratio of projecting image based on the input signal type, aspect ratio of the screen and resolution. For more details on the aspect ratios, refer to "When Projecting an Image from a Computer" on page 147 - Canon REALiS LCOS SX80 Mark II D | Multimedia Projector SX80 MarkII/SX800 Users - Page 66
Selecting Screen Aspect and Aspect ■How to Select an Aspect Ratio Press the ASPECT button on the remote control to select an appropriate aspect ratio. The selection is toggled among types for aspect ratios by pressing the ASPECT button. For more details on the aspect ratios, refer to "When - Canon REALiS LCOS SX80 Mark II D | Multimedia Projector SX80 MarkII/SX800 Users - Page 67
Projecting an Image Selecting an Image Mode You can select an image mode depending on the projecting image. In each image mode, you can further adjust the brightness, contrast, sharpness, gamma, color adjustment, advanced adjustment, and lamp mode. (P93) ■Image modes Standard Select this to project - Canon REALiS LCOS SX80 Mark II D | Multimedia Projector SX80 MarkII/SX800 Users - Page 68
Turning Off the Projector 1 Press the POWER button to pop up a window shown at the lower right. Remote control Top control Press the POWER button again while the confirmation message is displayed. The lamp goes off, the [POWER] indicator starts flashing in red and the cooling fan starts. • You - Canon REALiS LCOS SX80 Mark II D | Multimedia Projector SX80 MarkII/SX800 Users - Page 69
Table of Contents Safety Instructions Useful Functions Available During a Presentation Before Use Projecting an Image Useful Functions Available During a Presentation Setting Up Functions from Menus Projecting an Image from a Digital - Canon REALiS LCOS SX80 Mark II D | Multimedia Projector SX80 MarkII/SX800 Users - Page 70
Useful Functions Available During a Presentation Blackened Out an Image Temporarily Useful when: • You finished the presentation. • You want to divert attendees' attention from the screen. Remote control Freezing the Picture Useful when: • You want to perform a computer operation which is - Canon REALiS LCOS SX80 Mark II D | Multimedia Projector SX80 MarkII/SX800 Users - Page 71
Adjusting the Volume Useful Functions Available During a Presentation Muting the Sound Useful when: • You want to adjust the volume level of the projectors or external speaker. Remote control Useful when: • You want to temporality mute the unnecessary sound. • You want to immediately mute the - Canon REALiS LCOS SX80 Mark II D | Multimedia Projector SX80 MarkII/SX800 Users - Page 72
Useful Functions Available During a Presentation Zooming an Image Useful when: • Zoom in an object such as a small graph during a presentation (up to 12x). • Focusing on the current subject. Press the button. A part of the image is enlarged each time pressed. Remote control You can move the area - Canon REALiS LCOS SX80 Mark II D | Multimedia Projector SX80 MarkII/SX800 Users - Page 73
Useful Functions Available During a Presentation Useful Functions Available During a Presentation Showing the Elapsed Time Useful when: • You want to manage the proceedings of the presentation. Projecting Image Without Computer (SX80 II) Useful when: • You want to project an image from a digital - Canon REALiS LCOS SX80 Mark II D | Multimedia Projector SX80 MarkII/SX800 Users - Page 74
74 - Canon REALiS LCOS SX80 Mark II D | Multimedia Projector SX80 MarkII/SX800 Users - Page 75
Setting Functions from Menus Table of Contents Safety Instructions Before Use Projecting an Image Useful Functions Available During a Presentation Setting Up Functions from Menus Projecting an Image from a Digital Camera or an USB Flash - Canon REALiS LCOS SX80 Mark II D | Multimedia Projector SX80 MarkII/SX800 Users - Page 76
How to Use Menus With a menu, you can set the operation of the projector in detail. ■Menu Configuration The menu screen is divided into four tabs as follows: [Display settings] tab (P79) You can set the type of signal or the method of projection of the images input. [System settings] tab (P103) - Canon REALiS LCOS SX80 Mark II D | Multimedia Projector SX80 MarkII/SX800 Users - Page 77
■Basic Operation of Menu 1 Press the MENU button to display a menu window. Remote control Top control How to Use Menus 2 Use [] to select a tab. Remote control Top control < < • If the tab position is not highlighted in orange, use [ ] / [ ] to move the highlight to the top. 3 Use [ - Canon REALiS LCOS SX80 Mark II D | Multimedia Projector SX80 MarkII/SX800 Users - Page 78
the adjustment volume. In a different screen (1) Example: Menu position 1. Press the OK button to display a different screen. 2. The follow the instruction on the screen. In a different screen (2) < < Example: Tracking 1. Press the OK button to display a different screen. 2. Use [ ] / [ ] to - Canon REALiS LCOS SX80 Mark II D | Multimedia Projector SX80 MarkII/SX800 Users - Page 79
Setting Up Functions from Menus Setting Display Status Selecting an Image Projection Mode [Aspect] HDMI DIGITAL PC ANALOG PC COMPONENT VIDEO/S-VIDEO USB Display settings Aspect You can select a projection mode corresponding to the aspect ratio of image. • Different contents are displayed for - Canon REALiS LCOS SX80 Mark II D | Multimedia Projector SX80 MarkII/SX800 Users - Page 80
to accept your setting and then press the MENU button. Select an input signal corresponding to the resolution of the computer. • For the signal types supported by the projector, see the table on page 150. Press the OK button to accept your setting and then press the MENU button. • [Auto] is - Canon REALiS LCOS SX80 Mark II D | Multimedia Projector SX80 MarkII/SX800 Users - Page 81
. Press the OK button to accept your setting and then press the MENU button. • [Auto] is the factory default. • Refer to the User's Manual of your AV equipment connected to the projector to confirm the component signal type. Use [] to select a value. When you have completed the adjustment - Canon REALiS LCOS SX80 Mark II D | Multimedia Projector SX80 MarkII/SX800 Users - Page 82
Setting Display Status Adjusting Input Signal (ANALOG PC) - Tracking [Input signal settings] - [Tracking] HDMI DIGITAL PC ANALOG PC COMPONENT VIDEO/S-VIDEO USB Adjust Input Signal (ANALOG PC) - Horizontal position [Input signal settings] - [Horizontal position] HDMI DIGITAL PC ANALOG PC - Canon REALiS LCOS SX80 Mark II D | Multimedia Projector SX80 MarkII/SX800 Users - Page 83
Setting Display Status Adjust Input Signal (ANALOG PC) - Vertical position [Input signal settings] - [Vertical position] HDMI DIGITAL PC ANALOG PC COMPONENT VIDEO/S-VIDEO USB Adjust Input Signal (ANALOG PC) - Horizontal pixels [Input signal settings] - [Horizontal pixels] HDMI DIGITAL PC - Canon REALiS LCOS SX80 Mark II D | Multimedia Projector SX80 MarkII/SX800 Users - Page 84
. • The signal level is select automatically in [Auto] mode. (Some AV equipment may not support this.) • If the HDMI output of your AV equipment allows switching between [Normal] and [Expanded more detailed information, refer to the User's Manual of your AV equipment connected to the projector. 84 - Canon REALiS LCOS SX80 Mark II D | Multimedia Projector SX80 MarkII/SX800 Users - Page 85
Select HDMI Over Scan (SX80 II) [HDMI over scan] HDMI DIGITAL PC ANALOG PC COMPONENT VIDEO/S-VIDEO USB Display settings HDMI over scan You can select this as required when you project visual software with the HDMI signals. Setting Display Status Performing Progressive Processing [Progressive] - Canon REALiS LCOS SX80 Mark II D | Multimedia Projector SX80 MarkII/SX800 Users - Page 86
Setting Display Status Selecting a Menu Position [Menu position] HDMI DIGITAL PC ANALOG PC COMPONENT VIDEO/S-VIDEO USB Display settings Menu position You can change the position of menu displayed. Correcting the Screen Color [Screen color] HDMI DIGITAL PC ANALOG PC COMPONENT VIDEO/S-VIDEO USB - Canon REALiS LCOS SX80 Mark II D | Multimedia Projector SX80 MarkII/SX800 Users - Page 87
Reversing projection [Image flip H/V] HDMI DIGITAL PC ANALOG PC COMPONENT VIDEO/S-VIDEO USB Display settings Image flip H/V You can make this setting if you want to hang the projector from the ceiling or project an image from behind the screen. Setting Display Status None (Normal image) Ceiling - Canon REALiS LCOS SX80 Mark II D | Multimedia Projector SX80 MarkII/SX800 Users - Page 88
Setting Display Status Capturing a Logo (SX800) [User screen settings] - [Logo capture] ANALOG PC COMPONENT VIDEO Display settings User screen settings Logo capture You can capture a part of the images being projected as [User logo]. Selecting the User Logo Display Position (SX800) [User screen - Canon REALiS LCOS SX80 Mark II D | Multimedia Projector SX80 MarkII/SX800 Users - Page 89
No Signal Screen (SX80 II) [User screen settings] - [No signal screen] HDMI DIGITAL PC ANALOG PC COMPONENT VIDEO/S-VIDEO USB Display settings User screen settings No signal screen You can display either of a black or blue screen when there is no input signal. Setting Display Status Screen When - Canon REALiS LCOS SX80 Mark II D | Multimedia Projector SX80 MarkII/SX800 Users - Page 90
Setting Display Status Selecting a Logo at Startup (SX80 II) [User screen settings] - [Projector on] HDMI DIGITAL PC ANALOG PC COMPONENT VIDEO/S-VIDEO USB No Signal Screen (SX800) [User screen settings] - [No signal screen] ANALOG PC COMPONENT VIDEO Display settings User screen settings - Canon REALiS LCOS SX80 Mark II D | Multimedia Projector SX80 MarkII/SX800 Users - Page 91
Screen When Blank (SX800) [User screen settings] - [Screen when blank] ANALOG PC COMPONENT VIDEO Display settings User screen settings Screen when blank You can display a user logo a screen when the projected image is blackened out temporarily by pressing the BLANK button on the remote control. - Canon REALiS LCOS SX80 Mark II D | Multimedia Projector SX80 MarkII/SX800 Users - Page 92
Setting Display Status Selecting Aspect Ratio of Screen [Screen aspect] HDMI DIGITAL PC ANALOG PC COMPONENT VIDEO/S-VIDEO USB Display settings Screen aspect You can select proper option corresponding to the aspect ratio of the projecting screen. 4:3 Select this when you use a screen with - Canon REALiS LCOS SX80 Mark II D | Multimedia Projector SX80 MarkII/SX800 Users - Page 93
Setting the Image Quality Selecting an Image Quality [Image mode] HDMI DIGITAL PC ANALOG PC COMPONENT VIDEO/S-VIDEO USB Image adjustment Image mode You can select an image mode suitable for the projecting image. You can select it also with the IMAGE button on the remote control. SX80 MarkII - Canon REALiS LCOS SX80 Mark II D | Multimedia Projector SX80 MarkII/SX800 Users - Page 94
Setting the Image Quality Adjusting the Brightness [Brightness] HDMI DIGITAL PC ANALOG PC COMPONENT VIDEO/S-VIDEO USB Image adjustment Brightness You can adjust the brightness of images. SX80 MarkII Adjusting the Contrast [Contrast] HDMI DIGITAL PC ANALOG PC COMPONENT VIDEO/S-VIDEO USB Image - Canon REALiS LCOS SX80 Mark II D | Multimedia Projector SX80 MarkII/SX800 Users - Page 95
Adjusting the Sharpness [Sharpness] HDMI DIGITAL PC ANALOG PC COMPONENT VIDEO/S-VIDEO USB Image adjustment Sharpness You can adjust the sharpness of images. SX80 MarkII Setting the Image Quality Making a Gamma Correction [Gamma] HDMI DIGITAL PC ANALOG PC COMPONENT VIDEO/S-VIDEO USB Image - Canon REALiS LCOS SX80 Mark II D | Multimedia Projector SX80 MarkII/SX800 Users - Page 96
Setting the Image Quality Making Color Adjustment (HDMI) (SX80 II) [Color adjustment] HDMI DIGITAL PC ANALOG PC COMPONENT VIDEO/S-VIDEO USB Image adjustment Color adjustment You can adjust the color quality of images for each of primary colors, red, green and blue. Making Color Adjustment ( - Canon REALiS LCOS SX80 Mark II D | Multimedia Projector SX80 MarkII/SX800 Users - Page 97
Making Color Adjustment (COMPONENT/ VIDEO/S-VIDEO) (SX80 II) [Color adjustment] HDMI DIGITAL PC ANALOG PC COMPONENT VIDEO/S-VIDEO USB Image adjustment Color adjustment You can adjust the color depth and hue of images for each of primary colors, red, green and blue. Setting the Image Quality - Canon REALiS LCOS SX80 Mark II D | Multimedia Projector SX80 MarkII/SX800 Users - Page 98
Setting the Image Quality Making Color Adjustment (COMPONENT/ VIDEO) (SX800) [Color adjustment] ANALOG PC COMPONENT VIDEO Image adjustment Color adjustment You can adjust the color depth and hue of images for each of primary colors, red, green and blue. Making Advanced Adjustment (Noise reduction) - Canon REALiS LCOS SX80 Mark II D | Multimedia Projector SX80 MarkII/SX800 Users - Page 99
Making Advanced Adjustment (Dynamic gamma) [Advanced adjustment] - [Dynamic gamma] HDMI DIGITAL PC ANALOG PC COMPONENT VIDEO/S-VIDEO USB Image adjustment Advanced adjustment Dynamic gamma You can adjust the gradation representation of light and dark portions of an image automatically. Setting - Canon REALiS LCOS SX80 Mark II D | Multimedia Projector SX80 MarkII/SX800 Users - Page 100
Setting the Image Quality Making Advanced Adjustment (Auto fleshtone) (SX800) [Advanced adjustment] - [Auto fleshtone] ANALOG PC COMPONENT VIDEO Image adjustment Advanced adjustment Auto fleshtone You can represent the skin color impressively. Adjusting Fine Color Adjustment (6-axis color adjust) ( - Canon REALiS LCOS SX80 Mark II D | Multimedia Projector SX80 MarkII/SX800 Users - Page 101
Setting the Image Quality Correcting the Image According to the Ambient Light (SX80 II) [Ambient light] HDMI DIGITAL PC ANALOG PC COMPONENT VIDEO/S-VIDEO USB Ambient light Image adjustment Level L Select this if the ambient light source is a light bulb or bulb color fluorescent. M Select - Canon REALiS LCOS SX80 Mark II D | Multimedia Projector SX80 MarkII/SX800 Users - Page 102
Setting the Image Quality Reducing the Lamp Brightness [Lamp mode] HDMI DIGITAL PC ANALOG PC COMPONENT VIDEO/S-VIDEO USB Resetting the Image Settings [Reset] HDMI DIGITAL PC ANALOG PC COMPONENT VIDEO/S-VIDEO USB Image adjustment Lamp mode Reducing the lamp brightness reduces power consumption - Canon REALiS LCOS SX80 Mark II D | Multimedia Projector SX80 MarkII/SX800 Users - Page 103
Setting Various Function Setting Auto Setup Function [Auto setup] HDMI DIGITAL PC ANALOG PC COMPONENT VIDEO/S-VIDEO USB System settings Auto setup You can select an items you want to enable in the auto setup function. SX80 MarkII Selecting the Power Management Mode [Power management mode] HDMI - Canon REALiS LCOS SX80 Mark II D | Multimedia Projector SX80 MarkII/SX800 Users - Page 104
Setting Various Function Skip the POWER Button Operation [Direct power on] HDMI DIGITAL PC ANALOG PC COMPONENT VIDEO/S-VIDEO USB Enabling/Disabling the Beep [Beep] HDMI DIGITAL PC ANALOG PC COMPONENT VIDEO/S-VIDEO USB System settings Direct power on You can turn on the projector only by - Canon REALiS LCOS SX80 Mark II D | Multimedia Projector SX80 MarkII/SX800 Users - Page 105
Setting Various Function Prohibiting the Projector Operation [Key lock] HDMI DIGITAL PC ANALOG PC COMPONENT VIDEO/S-VIDEO USB System settings Key lock You can prohibit the operation of the projector from either the top control or remote control. Selecting a Display Language [Language] HDMI - Canon REALiS LCOS SX80 Mark II D | Multimedia Projector SX80 MarkII/SX800 Users - Page 106
screen which explains operations. System settings LED illumination You can select whether to turn on or off LED illumination (P28). Off Hides the guide screen. On Shows the guide screen. Press the OK button to accept your setting and then press the MENU button. • [On] is the factory default. • The - Canon REALiS LCOS SX80 Mark II D | Multimedia Projector SX80 MarkII/SX800 Users - Page 107
Setting for Slideshow (SX80 II) [Slideshow interval] HDMI DIGITAL PC ANALOG PC COMPONENT VIDEO/S-VIDEO USB System settings Slideshow interval You can project the images stored in a PictBridge-compatible device (P114) or a USB flash memory (P118) in the slideshow. Setting Various Function - Canon REALiS LCOS SX80 Mark II D | Multimedia Projector SX80 MarkII/SX800 Users - Page 108
Normal] is the factory default. • You cannot extend the display time for the window indicating the completion of Auto setup (P53), the guide window (P106), the lamp replacement window (preparation) (P145), or the lamp replacement window (warning) (P145). • You cannot use the button holding operation - Canon REALiS LCOS SX80 Mark II D | Multimedia Projector SX80 MarkII/SX800 Users - Page 109
Registering a Password [Other settings] - [Register password] HDMI DIGITAL PC ANALOG PC COMPONENT VIDEO/S-VIDEO USB System settings Other settings Register password You can register a password for starting projection. Setting Various Function Resetting the Lamp Counter [Other settings] - [ - Canon REALiS LCOS SX80 Mark II D | Multimedia Projector SX80 MarkII/SX800 Users - Page 110
Setting Various Function Select [OK] on the screen for confirmation, press the OK button, and the lamp counter is reset. Over 2,000 hours Displayed in green, yellow and red bar. Press the MENU button. ■ About the Display of the Lamp Counter The lamp counter displays the hours of use of the lamp - Canon REALiS LCOS SX80 Mark II D | Multimedia Projector SX80 MarkII/SX800 Users - Page 111
Initializing network settings (SX80 II) [Other settings] -[Network setting initialization] HDMI DIGITAL PC ANALOG PC COMPONENT VIDEO/S-VIDEO USB System settings Other settings Network setting initialization You can Initialize the network settings. Setting Various Function Resetting to the - Canon REALiS LCOS SX80 Mark II D | Multimedia Projector SX80 MarkII/SX800 Users - Page 112
Checking the Information of the Projector [Information] HDMI DIGITAL PC ANALOG PC COMPONENT VIDEO/S-VIDEO USB Information You can confirm the information about the signal types of the images projected and other projector-specific information. SX80 MarkII SX800 Information shown Item Meaning - Canon REALiS LCOS SX80 Mark II D | Multimedia Projector SX80 MarkII/SX800 Users - Page 113
Table of Contents Safety Instructions Projecting an Image from a Digital Camera or an USB Flash Memory (SX80 II) Before Use Projecting an Image Useful Functions Available During a Presentation Setting Up - Canon REALiS LCOS SX80 Mark II D | Multimedia Projector SX80 MarkII/SX800 Users - Page 114
project an image by connecting a PictBridgecompatible device and by using the same operation as that of printing. Cameras bearing this mark supports PictBridge. For the up-to-date information regarding PictBridge, visit Cannon's website (http://www.canon.com/pictbridge/) or PictBridge's website - Canon REALiS LCOS SX80 Mark II D | Multimedia Projector SX80 MarkII/SX800 Users - Page 115
the device varies depending on the model. Refer to the User's Manual for the relevant equipment. USB cable Digital camera (Digital camera/digital screen as shown in the right (USB file browser) appears, the device supports the USB mass storage class (serves as an external hard drive to Windows - Canon REALiS LCOS SX80 Mark II D | Multimedia Projector SX80 MarkII/SX800 Users - Page 116
Projecting an Image from a Digital Camera (SX80 II) Operating the Projected Image When images are projected, you can perform the following operations. ■Switching to the Next Image If you have specified multiple images for printing with the digital camera, you can switch to the next image by - Canon REALiS LCOS SX80 Mark II D | Multimedia Projector SX80 MarkII/SX800 Users - Page 117
Projecting an Image from a Digital Camera (SX80 II) Running a Slideshow You can run a slideshow that projects multiple images stored in the digital camera at certain intervals. ■Setting a Slideshow Interval By setting projection intervals in [Slideshow interval] from the menu, you can run a - Canon REALiS LCOS SX80 Mark II D | Multimedia Projector SX80 MarkII/SX800 Users - Page 118
flash memory Connectable USB Devices With this projector, you can connect the USB devices (general USB flash memories or USB-connected hard disks) that support the mass storage class (serves as an external hard drive to Windows computers). Also, you can connect various memory cards via USB memory - Canon REALiS LCOS SX80 Mark II D | Multimedia Projector SX80 MarkII/SX800 Users - Page 119
Projecting Data on USB Flash Memory (SX80 II) 3 Connect a USB flash memory. Connect a USB flash memory to the USB terminal. Use a USB cable to connect a digital camera or USB memory card reader. Be sure to use the USB cable supplied with the equipment connected to the projector. USB flash memory - Canon REALiS LCOS SX80 Mark II D | Multimedia Projector SX80 MarkII/SX800 Users - Page 120
Projecting Data on USB Flash Memory (SX80 II) Description of USB File Browser If a USB flash memory is connected to the projector, the USB file browser appears. In the USB file browser, you can select the image file to be projected by operating the file list in the USB memory device. List title - Canon REALiS LCOS SX80 Mark II D | Multimedia Projector SX80 MarkII/SX800 Users - Page 121
Projecting Data on USB Flash Memory (SX80 II) Selecting an Image for Projection This section describes the steps for selecting an image in the USB file browser and projecting on the screen. ■Selecting a Drive If a USB flash memory is connected, skip this step. If a USB memory card reader having - Canon REALiS LCOS SX80 Mark II D | Multimedia Projector SX80 MarkII/SX800 Users - Page 122
Projecting Data on USB Flash Memory (SX80 II) ■Selecting an Image File for Projection < < 1 Select an image file with [ ] / [ ]. Remote control Top control The selected image appears in the preview area with reduced size. • To return to upper hierarchy, select and press the OK button. 2 - Canon REALiS LCOS SX80 Mark II D | Multimedia Projector SX80 MarkII/SX800 Users - Page 123
Projecting an Image from a Digital Camera or an USB Flash Memory (SX80 II) < < Projecting Data on USB Flash Memory (SX80 II) Operating the Projected Image When images are projected, you can perform the following operations. ■Switching to the Previous/Next Image If multiple image files are saved - Canon REALiS LCOS SX80 Mark II D | Multimedia Projector SX80 MarkII/SX800 Users - Page 124
Projecting Data on USB Flash Memory (SX80 II) Running a Slideshow of Data saved in a USB Flash Memory You can run a slideshow that projects multiple images stored in a USB flash memory at certain intervals. ■Creating an Image File Folder In the slideshow, image files in a folder are displayed in the - Canon REALiS LCOS SX80 Mark II D | Multimedia Projector SX80 MarkII/SX800 Users - Page 125
Table of Contents Safety Instructions Connecting the Projector to Network (SX80 II) Before Use Projecting an Image Useful Functions Available During a Presentation Setting Up Functions from Menus Projecting an Image - Canon REALiS LCOS SX80 Mark II D | Multimedia Projector SX80 MarkII/SX800 Users - Page 126
Setting an IP Address (SX80 II) It is possible to send an error notification e-mail (P135) from the projector to the computer when you connect the projector to the network. To connect via the network, an IP address must be assigned to the projector. Set an IP address by following the steps below. ( - Canon REALiS LCOS SX80 Mark II D | Multimedia Projector SX80 MarkII/SX800 Users - Page 127
Setting an IP Address (SX80 II) ■Resetting the IP Address Setting of the Computer 1 Turn off the projector and remove the LAN cable. 2 Follow the step 3 to 6 to restore the network setting to the original setting. 127 Connecting the Projector to Network (SX80 II) - Canon REALiS LCOS SX80 Mark II D | Multimedia Projector SX80 MarkII/SX800 Users - Page 128
. 2 Launch a web browser, enter "http://192.168.254.254" in the address bar, and press the Enter key. The password input screen appears. The supported web browsers is Microsoft Internet Explorer 6 or later. 3 In the password input screen, enter "root" for [User name] and "system" for [Password] and - Canon REALiS LCOS SX80 Mark II D | Multimedia Projector SX80 MarkII/SX800 Users - Page 129
Setting Network (SX80 II) ■Setting the Network 1 In the menu screen, click [Password], input the new user name and password, and click the [OK] button. Setting items: [User name]: The user name for logging in the network [New password]: The new password [Confirm new password]: The password - Canon REALiS LCOS SX80 Mark II D | Multimedia Projector SX80 MarkII/SX800 Users - Page 130
Setting Network (SX80 II) 3 Click [Mail], enter appropriate values in the following field for the error report, and click the [OK] button. Setting items: [To:]: The E-mail address to which the error report is sent (Within 63 alphanumeric characters) [Cc:]: The E-mail address to which the - Canon REALiS LCOS SX80 Mark II D | Multimedia Projector SX80 MarkII/SX800 Users - Page 131
Setting Network (SX80 II) 4 If the SMTP mail server authentication is required, click [Mail auth], enter appropriate values in the following field, and click the [OK] button. Select one of the following four authentication method in [Mail authentication]. Select [OFF] if the mail authentication - Canon REALiS LCOS SX80 Mark II D | Multimedia Projector SX80 MarkII/SX800 Users - Page 132
[Trap community]: The name of the community (user) to which the SNMP trap is sent What is the SNMP Agent Function? This projector supports the SNMP (Simple Network Management Protocol) agent function that monitors the status of the projector. SNMP consists of the manager (a monitoring tool, your - Canon REALiS LCOS SX80 Mark II D | Multimedia Projector SX80 MarkII/SX800 Users - Page 133
Setting Network (SX80 II) • Filter message: it tells that the air filter has reached its replacement tim- ing. • Unknown: it tells that an unknown error was occurred. Make sure to install the SNMP manager program on your PC before using the SNMP agent function. Authentication and Encryption - Canon REALiS LCOS SX80 Mark II D | Multimedia Projector SX80 MarkII/SX800 Users - Page 134
Setting Network (SX80 II) If you want to test the error report transmission, click [Send test mail]. ■Resetting the Network Setting 1 Click [Initialize] in the menu screen. 2 Click the [OK] button when the following dialog box is displayed. If you want to restore to the factory setting from the - Canon REALiS LCOS SX80 Mark II D | Multimedia Projector SX80 MarkII/SX800 Users - Page 135
The temperature inside the projector is too high for some reason or the outside air temperature is higher than the specified one. If the problem is inside the projector, check whether the projector is installed and operated normally, turn off the projector to cool its inside, and retry projection - Canon REALiS LCOS SX80 Mark II D | Multimedia Projector SX80 MarkII/SX800 Users - Page 136
Setting Network (SX80 II) ■Projector Control 1 Click the [Projector control] button on the network setting screen. The projector control screen appears. Controlled items: [Power]: Turn ON/OFF the projector (P49, P68) [Input]: Select an input signal (P54) [Aspect]: Select an aspect ratio (P62 - Canon REALiS LCOS SX80 Mark II D | Multimedia Projector SX80 MarkII/SX800 Users - Page 137
Appendix Table of Contents Safety Instructions Before Use Projecting an Image Useful Functions Available During a Presentation Setting Up Functions from Menus Projecting an Image from a Digital Camera or an USB Flash Memory (SX80 II) Connecting the Projector to Network (SX80 II) Appendix Index 137 - Canon REALiS LCOS SX80 Mark II D | Multimedia Projector SX80 MarkII/SX800 Users - Page 138
Troubleshooting WARNING Lamp Flash Patterns The WARNING lamp on the Control Panel flashes in red after the projector is turned off when there is a trouble in the projector. • Wait until the cooling fan stops and disconnect the power plug from the AC outlet before dealing with the trouble problem is - Canon REALiS LCOS SX80 Mark II D | Multimedia Projector SX80 MarkII/SX800 Users - Page 139
Troubleshooting Symptoms and Solutions ■You cannot turn on the projector. Cause signal type is incorrect. The BLANK function has been selected. No image is sent due to the problem in the computer. Countermeasure Check whether the projector is connected to the computer or AV equipment correctly. - Canon REALiS LCOS SX80 Mark II D | Multimedia Projector SX80 MarkII/SX800 Users - Page 140
Troubleshooting Cause The external monitor output is not set on the notebook (SX80 II) Cause PictBridge is not supported. The mass storage class is not supported. Countermeasure Equipment not supporting PictBridge is not recognized. Refer to the User's Manual for the relevant equipment. (P114) USB - Canon REALiS LCOS SX80 Mark II D | Multimedia Projector SX80 MarkII/SX800 Users - Page 141
Troubleshooting ■The projected image is blur. Cause The image is out of focus. The distance to the screen is too short. The projector is not placed - Canon REALiS LCOS SX80 Mark II D | Multimedia Projector SX80 MarkII/SX800 Users - Page 142
Troubleshooting Cause The operating temperature is inappropriate. Other reasons Countermeasure Check whether the operating temperature is 5 to 35°C. (P20) If you use the projector at 1900 - Canon REALiS LCOS SX80 Mark II D | Multimedia Projector SX80 MarkII/SX800 Users - Page 143
cleaning liquid or benzine, as these may damage the finish of the projector. • When using a chemical dust cloth, make sure to read the instructions thoroughly. • When cleaning the projector's lens, use a commonly available air blower or lens cleaning paper. The lens surface is easily damaged, so do - Canon REALiS LCOS SX80 Mark II D | Multimedia Projector SX80 MarkII/SX800 Users - Page 144
Maintenance Cleaning and Replacing the Air Filter An air filter is installed in the air intake vent on the bottom of the main body to protect the internal lens and mirror from dust. Should the air filter become clogged with dust, the projector may be damaged since it will block the air flow into the - Canon REALiS LCOS SX80 Mark II D | Multimedia Projector SX80 MarkII/SX800 Users - Page 145
degrade. • Make sure to handle the lamp carefully and correctly since it may explode if it is scratched or shocked. If a lamp explodes, follow the instructions under "If a Lamp Explodes" on page 18. • Do not remove screws unless specified. 145 - Canon REALiS LCOS SX80 Mark II D | Multimedia Projector SX80 MarkII/SX800 Users - Page 146
Maintenance ■Replacing the Lamp 1 Turn off the projector, disconnect the power plug from the AC outlet, and let the projector stand for at least 1 hour. 2 As shown in the figure, insert a flat- head screwdriver in the gap and remove the lamp cover by raising it. 3 Loosen two screws with a phillips- - Canon REALiS LCOS SX80 Mark II D | Multimedia Projector SX80 MarkII/SX800 Users - Page 147
Relationship between Aspect and Screen Aspect This section describes the relationship between screen aspect (P62) and aspect (P65). To project an image on the whole screen, select the most appropriate screen aspect ratio and aspect according to the aspect ratio of the screen and input signal type. - Canon REALiS LCOS SX80 Mark II D | Multimedia Projector SX80 MarkII/SX800 Users - Page 148
Relationship between Aspect and Screen Aspect When Projecting an Image from Image Software To project an image such as an image shot by a TV set, commercially available DVD software, or video camcorder (input signal [HDMI (SX80 II)], [VIDEO], [S-VIDEO (SX80 II)], [COMPONENT]), select an aspect - Canon REALiS LCOS SX80 Mark II D | Multimedia Projector SX80 MarkII/SX800 Users - Page 149
Relationship between Aspect and Screen Aspect When Projecting an Image from a Digital Camera or a USB Flash Memory (SX80 II) The [Auto] mode is automatically selected for the aspect ratio when displaying an image from a digital camera or USB flash memory (selecting [USB] as the input signal). The - Canon REALiS LCOS SX80 Mark II D | Multimedia Projector SX80 MarkII/SX800 Users - Page 150
Computer Signal Types This projector supports following signal types. If your computer or AV .06 1280 x 960 MAC 75.00 75.08 *1 is only applicable to SX80 MarkII * This projector does not support any computer sig- nal of which dot clock is 170 MHz or higher. Resolution (dots) 640 x 480 800 - Canon REALiS LCOS SX80 Mark II D | Multimedia Projector SX80 MarkII/SX800 Users - Page 151
Relationship between Screen Size and Projecting Distance Height Height 4:3 Screen size 16:9 Width Width Screen size at 4:3 aspect ratio Type - W x D cm 40" (81 x 61) 50" (102 x 76) 60" (122 x 91) 70" (142 x 107) 80" (163 x 122) 90" (183 x 137) 100" (203 x 152) 110" (224 x 168) 120" (244 x - Canon REALiS LCOS SX80 Mark II D | Multimedia Projector SX80 MarkII/SX800 Users - Page 152
interface for AV equipment. It can transmit non-compressed images and audio signals simultaneously. It supports digital contents copy-protected with the HDCP technology. The projector supports HDMI 1.3 standard (10-bit deep color). HDCP* An abbreviation of High-bandwidth Digital Content Protection - Canon REALiS LCOS SX80 Mark II D | Multimedia Projector SX80 MarkII/SX800 Users - Page 153
Glossary Aspect (P65, P79, P147) The aspect ratio is the ratio of the horizontal dimension (width) to the vertical dimension (height) of a screen. It is expressed as "width : height." The following aspect ratios are normally used in Computer or AV equipment. [4:3] The aspect ratio for SXGA+ (1400 x - Canon REALiS LCOS SX80 Mark II D | Multimedia Projector SX80 MarkII/SX800 Users - Page 154
of image data. The gamma correction function works effectively when portions of an image are obscure because they are too light or dark. This projector supports manual gamma correction and dynamic gamma correction which performs the gamma correction automatically. 154 - Canon REALiS LCOS SX80 Mark II D | Multimedia Projector SX80 MarkII/SX800 Users - Page 155
color adjustment in the image adjustment menu. PictBridge* (P114) A standard protocol established by CIPA (Camera & Imaging Products Association) that supports various digital photo solutions including camera direct print to print shot images by directly connecting a digital camera to a printer - Canon REALiS LCOS SX80 Mark II D | Multimedia Projector SX80 MarkII/SX800 Users - Page 156
Specifications ■ Projector Projection Display lens device Model name SX80 MarkII/SX800 Display system RGB liquid crystal system Optical system Color separation by dichroic mirror/polarizing beam splitter and color composition by prism Type Reflective liquid crystal panel Size/Aspect ratio - Canon REALiS LCOS SX80 Mark II D | Multimedia Projector SX80 MarkII/SX800 Users - Page 157
■External View Specifications 45 mm (1.80") 59.3 mm (2.37") 340 mm (13.60") 121 mm (4.84") 332 mm (13.28") Screw Holes for Installation of ceiling-mount hanger (M4 x 5) 62.5 mm (2.5") 39.6 mm (1.58") 135.9 mm (5.44") 113.7 mm (4.55") 136.8 mm (5.47") 33.4 mm (1.34") 133.0 mm (5.32") ■ - Canon REALiS LCOS SX80 Mark II D | Multimedia Projector SX80 MarkII/SX800 Users - Page 158
Specifications ■Service Port (CONTROL) D-sub 9pin Communication format Communication mode: RS-232-C, asynchronous, half-duplex communication Communication speed:19,200 bps Character length: 8 bits Stop bits: 2 bits - Canon REALiS LCOS SX80 Mark II D | Multimedia Projector SX80 MarkII/SX800 Users - Page 159
Specifications Function Lamp mode Normal Quiet Get Blank On BLANK Blank Off Get ASCII Representation LAMP=NORMAL LAMP=SILENT GET LAMP BLANK=ON BLANK=OFF 42h GET BLANK Binary Representation 4Ch 41h 4Dh 50h 3Dh 4Eh 4Fh 52h 4Dh 41h 4Ch 0Dh 4Ch 41h 4Dh 50h 3Dh 53h 49h 4Ch - Canon REALiS LCOS SX80 Mark II D | Multimedia Projector SX80 MarkII/SX800 Users - Page 160
, 42, 54 Dynamic gamma 99 E External monitor (SX80 II 42 F Factory defaults 111 FOCUS 59 FREEZE 70 G Gain 96, 97, 155 Gamma correction 95, 154 Guide 106 H HDCP 152 HDMI (SX80 II 44, 54, 152 HDMI IN terminal (SX80 II 29, 44 HDMI input level (SX80 II 84 160 - Canon REALiS LCOS SX80 Mark II D | Multimedia Projector SX80 MarkII/SX800 Users - Page 161
Index HDMI over scan (SX80 II 85 Horizontal pixels 83 Horizontal position 82 I IMAGE 67 Image adjustment menu 76 Image flip H/V 87 Image mode 93 Image mode (Image quality 67 Information 76, 112 INPUT 55 Input signal select 80, 81 Input terminal 29 Connecting the projector to the - Canon REALiS LCOS SX80 Mark II D | Multimedia Projector SX80 MarkII/SX800 Users - Page 162
Index Setting up the projector 19, 35 Setting Various Function 103 Sharpness 95 Signal type 150 Slideshow (SX80 II 107, 117, 124 SNMP Agent Function (SX80 II 132 sRGB 67, 93, 152 S-VIDEO (SX80 II 45, 54, 152 S-VIDEO input terminal (SX80 II 29, 45 System settings menu 76 T Top control 28 - Canon REALiS LCOS SX80 Mark II D | Multimedia Projector SX80 MarkII/SX800 Users - Page 163
-CL09* • DVI digital cable Part No.: LV-CA29 * This part is used to hang the projector from a ceiling. For more detailed information, refer to the instruction manual that comes with the ceiling-mount hanger RS-CL10. 163 - Canon REALiS LCOS SX80 Mark II D | Multimedia Projector SX80 MarkII/SX800 Users - Page 164
Menu Configuration The Display settings menu Aspect DIGITAL PC (SX80 II)/ P79 ANALOG PC Auto * 4:3 16:9 True size VIDEO 4:3 * 16:9 Zoom S-VIDEO (SX80 II) Auto * 4:3 16:9 Zoom HDMI (SX80 II) Auto * 4:3 16:9 Zoom True size COMPONENT Auto * 4:3 16:9 Zoom True size USB ( - Canon REALiS LCOS SX80 Mark II D | Multimedia Projector SX80 MarkII/SX800 Users - Page 165
(setting after reset) ** : You can set this if you have selected [Photo] for [Image mode]. [DIGITAL PC], [HDMI], [USB], and [S-VIDEO] are supported only in SX80 MarkII. Advanced adjustment Noise reduction VIDEO/S-VIDEO (SX80 II)/ P98 COMPONENT/HDMI (SX80 II) Off Weak Strong Dynamic gamma Off - Canon REALiS LCOS SX80 Mark II D | Multimedia Projector SX80 MarkII/SX800 Users - Page 166
Polish Hungarian Czech Danish Arabic Chinese (Simplified) Chinese (Traditional) Korean Japanese Guide Off On * LED illumination Off On * Slideshow interval (SX80 II (setting after reset) [DIGITAL PC], [HDMI], [USB], and [S-VIDEO] are supported only in SX80 MarkII. P106 P106 P107 166 - Canon REALiS LCOS SX80 Mark II D | Multimedia Projector SX80 MarkII/SX800 Users - Page 167
167 - Canon REALiS LCOS SX80 Mark II D | Multimedia Projector SX80 MarkII/SX800 Users - Page 168
CANON INC. 30-2, Shimomaruko 3-chome, Ohta-ku, Tokyo 146-8501, Japan U.S.A. CANON U.S.A. INC. One Canon Plaza, Lake Success, NY 110421198, U.S.A. For all inquires concerning this product, call toll free in the U.S. 1-800-OK-CANON CANADA CANON CANADA INC. HEADQUARTERS 6390 Dixie Road, Mississauga,
Table of Contents
Safety Instructions
Before Use
Projecting an Image
Useful Functions Available During a Presentation
Setting Up Functions from Menus
Projecting an Image from a Digital Camera or an
USB Flash Memory (SX80 II)
Connecting the Projector to Network (SX80 II)
Appendix
Index
ENG
MULTIMEDIA PROJECTOR
User’s Manual